Recommended Posts

Posted

The name is Sascha, don't let the forum name fool you, i'm only occasionally an arse.

 

i've become interested in woodworking a long time ago, but at the moment have no place to do it in. we're currently looking to buy a house and when we do, i'll have a spot to work in. in the mean time, i'm trying to learn as much as i can by reading, watching videos etc. and slowly building my tool collection, so that when the time comes i can jump in feet first....hopefully not to crash and burn....

 

i'm glad i found Marc on youtubes and from that discovered (and recently joined) his guild, the wood talk podcasts and this fantastic looking forum.

 

can't wait to actually lay some hands on wood (man it's hard to talk about woodworking without double entendres... ) and bug you knowledgeable folks with all my stupid noob questions! 

 

Sash

Posted

well sash you dont need much room for wood working.  oh it helps to have a table saw, band saw, jointer, planer ect.... a full shop is sweet.  recently i got reduced from a huge space like 3000 square feet to a corner of my basments.  its been an ajustments that i havent quite finished but im geting there.  if you have limited space and not knowing what you have to work with you have a couple of options.

 

one option-wood turn then you just need a space as big as a dressor.  i have my lathe siting on top of an old dressor and i use the drawers to store my stuff in. so you could set up in a corner of the basement, a shed, a back room anywhere you got power and light.  (sadly since my only available  workspace is in the basement next to the furnice i cant turn.) 

 

second option-is carving then you just need a chair and  table and some hand tools or even just a sharp knife.  a flex shaft carving tool comes in prity  handy as well think super powered dremel.

 

Here is my work space when i was seting it up.  when i get more tools as finish it up ill post new pictures but it should give you an idea of what i have to work with

 

remember your knot (as in wood ha) alone in limited space.  if you need some help figureing out eather let me know.  i turned alot in the last two years and started carving in the last few months.

Posted

Good luck on the house hunting! All sorts of projects will present themselves once you have a place to set up shop. Duckkisser is getting quite skilled at working from a very small space.

Welcome to the neighborhood .

Posted

Good luck on the house hunting! All sorts of projects will present themselves once you have a place to set up shop. Duckkisser is getting quite skilled at working from a very small space.

Welcome to the neighborhood .

 

ha you say that but you havent realy seen anything i have recently made :)  mostly been trying to figure out how to set things up.  only the last month have i sat down and actuly made anything...............i miss my lathe waaaaaaa

 

thanks for the vote of confidence i have been working on a bunch of stuff waiting till i have a entire counter of small stuff and a nice day. then ill spray finish it all in one siting.  22 keychains, working on necklaces now, working on bone jewlary, inlaying a keep sake box, got 5-6 wood headbands, all small decrative stuff. small craft/gift iteams that will sell easily at a sale and then i can start paying off all the stuff i have goten recently to pay for my build up of the shop.

 

talked to this guy who has a literal closet for a work shop and he wants to add a lathe post-107-1292515024.jpg

Posted

thanks for the kind replies sirs!

 

sadly when i said i had no room, i literally meant no room. i live in a tiny 2 bedroom bungalow without a garage or even a basement and i think my wife would have a conniption if i were to start letting the shavings fly in the spare bedroom....plus my drum set is there, so i wouldn't want to cover it in saw dust either.

 

as far as tools are concerend, i've been building my tool cache over the past few years, whenever there was a sale on something i thought i might need.....(which i think probably left me owning a few of the wrong things...as the old adage goes: a little bit of knowledge is dangerous)

 

other than a generic handsaw and a set of cheapo chisels, i have no hand tools to speak of.

 

powertools on the other hand i'm doing ok on:

 

makita 18v drill and impact driver set

dewalt sawsall

b & d jig saw (me no likey....probably going to replace it eventually)

makita 5007mg 7¼" circular saw

dw716 12" double bevel compound mitre saw

dw744 10" portable table saw

dw618b3e 3 base router kit

ridgid ¼ sheet sander

bosch ros65vc random orbit sander

cheapo benchtop skil drillpress

ridgid compressor and a couple of nailers

and a shopvac for dust collection

 

keeping my eye out for when the ridgid oscillating belt/spindle sander and the dw735 planer come on sale...

 

after that i think i'll curb my mad buying skillz until i actually start woodworking and can better gauge what i actually need/want....

 

Sash

Posted

i say invest in a flex shaft carving tool and maybe some carving hand tools then you can go sit out on the porch on a nice day and wittle.  i know this old carver that the only tool he has is his boyscout carving knife from when he was 6.  he makes santa's and snow men and the like and every year at christmass he goes to the local schools sits in a classroom spends half an hour carving and gives one to each kid and sells the rest to the teachers and what not to buy wood for the next year.  like i said a comfey chair and a table would be all you need to keep your creative juices flowing.  then when you buy a house you can grow as a wood worker. 

 

good luck on the house search and tell your wife that if she loved you she would let you set up a shop in the kitchen :) after all dont want to ruin those drums

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Who's Online   1 Member, 0 Anonymous, 61 Guests (See full list)

  • Forum Statistics

    32.1k
    Total Topics
    437.6k
    Total Posts
  • Member Statistics

    26,009
    Total Members
    3,644
    Most Online
    Joseph b
    Newest Member
    Joseph b
    Joined