Recommended Posts

Posted

I'm building a workbench and was initially just going to have a front vise but after going to the Lie-Neilsen Hand Tool Event today and using an end vise for the first time, I now see how useful they are. I really like the price of this from Lee valley but I am not really sure how you might install it. I like to have the type where the wood block moves inside of the bench top, like the benchcrafted tail vise. Can the tail vise screw from Lee Valley be setup to do that? 

 

Thanks for the help

Posted

It seems that the only trick might be finding a nut that is threaded for your rod. You could mortise and epoxy the nut into a custom made block.

I think with such large threads you could also just tap a dense hardwood block but I have no experience tapping such large threads and I think a nut will be far cheaper than a large tap.

Posted

Just looked at your picture a second time. It you want to convert a standard tail vise to the kind of sled vise that Benchcrafted is pushing (block moves inside the bench) you likely would also need to craft your block to ride in runners like rabbeted drawer guides in order to protect from sagging. Their metal is machined into a system that accounts for this but I don't see why you couldn't get a similar function with wood and wax.

Posted

Hi RJ,

 

I am designing this into my French bench on sketchup at the moment. Should not be too difficult to retro fit. As C Shaffer says you will need to make a simple slide mechanism and perhaps a few other mods. Chris Schwarz has got one designed in at the start here or he retro fits one to his first french bench here. Although on the retro fit don't copy exactly what you see here. As you will see the end nearest the handle there is only a small end block left which would be sure to break in no time. The images in his book show the small block being removed and an approximately 4 x 2 (to match bench depth) being coach bolted the entire end which has the tail vice. That gives the best mounting for the tail vice on a retro fit with a good amount of travel on the bench screw.

Le us know how you get on.

Posted

I built a wagon vise using a 3/4" threaded rod and a couple of nuts that I bought at HD.  It isn't as elegant as the benchcrafted model, but it cost less than $10 for the hardware.  The two minor problems are that the screw threads are closer together so I have to turn more to move it and that the threads are right handed so clockwise loosens instead of tightens it.

 

For a small uptick in price you can purchase acme threaded rod and nuts in left handed direction that would solve both problems.

  • Like 1
Posted

Glad you found that, I've been looking and looking trying to find pre made left hand vise threads and missed this. I have no experience with Scan style vises. New homework to do:-)

  • 3 weeks later...
Posted

Just caught some early Norm on YouTube, where he builds a bench.  (2 part video... second part took forever thanks to the kids cruising the 'net at the same time.)  If I remember right...he went with the first option.  The block itself just ran on a pair of runners.  He used construction timbers, built the outer frame of the table top, and has the tail vise inside the frame.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.