Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Welding on the Sole of a Bench Plane?

Featured Replies

I went to the antique mall today and found a Stanley Bailey No. 8C jointer plane. I decided to go ahead and take a risk on it.

 

I say risk because the sole is kinda broken, as you can see in the photo below.

 

post-7772-0-16955300-1362257911_thumb.jp

 

In buying it my hopes are to try and find a guy that can fill in the broken area with a welder. I'm not even sure if that is possible, if you can really weld on cast parts like this. Do you guys have any idea? 

 

If it can't be welded, is there anything else I can do to fill it? 

 

But even if I can't fill, I should still be able to get it to work. I may not be able to get it to take super thin shavings but it would be useful when dimensioning boards by hand. 

Best place for this would be the bin :(  (although I look forward to being proved wrong).

 

  • Perhaps you could strip everything else off and look for a plane sole (here's one on US ebay) although the parts may not carry over.
  • Or sell the frog, cap iron, blade, knob etc on e-bay to get some fund for a better plane in the first place.
  • Or buy a similar plane (this one only has 4 hours left)  and use yours as spares  ;)

I have purchased all my planes from e-bay and yes they need a little tuning but that will help me get to know the tools. I have bought nothing newer than mid 1950's and the quality has been really good. All for a fraction of the premium brands with similar specs. 

 

Really hope someone can help you save it though. :)

It would make a nice paperweight. I learned the same way you are, bought a plane that had been welded back together. It looks like someone dropped it and it broke in two. No way to flatten the sole. You can harvest the parts to fix up another body.

  • Author

It does not have any other fractures or other signs of damage or repairs on the sole or the sides so believe the integrity of the plane is still intact. I went out and got this to fill in that area. I will put it on tomorrow and see how it works. 

Coming from a welder whom has worked on 100 year old cast iron work it's not worth the thought. Cant be done, not welding at least. Scrap it and chalk it up to a learning curve. I have a stanley jointer corrigated bottom with a hairline crack at the mouth but it hasen't moved or grown in years. JB weld is some good stuff but i still think you are better off saving what you can and scrap the rest. Just my 2 cents. I wish you luck and keep us posted on the jb weld!!!

Not sure how much this helps, but I am posting this for inspiration. I just seen this and thought about this post. There might be a way with enough ingenuity to make it into something usable. 

It's one thing to repair a crack but this plane needs material replaced.  Typically you would solder cast rather than weld it.  I'm afraid I have to agree - strip this one of the usable parts and use the sole for a paper weight.

If you decide to try using JBweld to fix it make sure to clean all the broken surfaces and coat the removable parts in wax or something to prevent them from being glued in place. Maybe you could extend the blade way out and pack the putty in behind it, let it harden twice as long as the package directions suggest, and flatten the sole from there..

But I just don't think the results are going to be worth the effort and expense. Chalk it up as a learning experience, use it as a decoration.

  • Author

I applied the JB weld and boy did that stuff stink to high heaven.

 

I took all the parts off then cleaned the chipped area. I then put a piece of wax paper down and reinstalled the frog on top of it, make sure to keep the frog as far back as possible to leave room for adjustments. I put another piece of wax paper on the frog and put the blade back in. I extended the blade all the way down. I kneaded the putty and pushed it into the chipped area. I then let it sit and cure for about 4 hours, the directions said it only needed 1 hour. 

 

Next, I took all the parts off again and inspected the patched area and was quite surprised how sturdy the repair was. I then too a file and worked the bottom until it was almost flush then filed the mouth opening. And that is how it is in the pictures below.

 

post-7772-0-32934400-1362367646_thumb.jp

 

post-7772-0-73613100-1362367664_thumb.jp

 

I am pretty happy with the results so far. I did start to lap the sole of the plane and got the repaired area flush and it still feels really strong. I think that this repair will make the plane usable again. I am very confident that it will hold up until I can afford to get a power jointer. 

 

I will update this again when I get the plane up and working order and get some shavings out of it. 

  • Author

Well I went to put the frog on and tighten the screw and I heard a crack. I looked at the sole and the repair had failed. I guess it didn't have enough surface area to grab on to. All well

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.