Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Running out of steam

Featured Replies

Army, i was stationed at fort lewis

Yea, that's the other side of the mountains from me.  I'm in the Tri-Cities.

  • Author

I drove home on 80 or 90 east, and driving through the mountains of washinton was probably the most beautiful thing i have seen.

Yea, don't tell anyone.  We're over populated already. ;o)

  • Author

Dont talk to me about over populated i live on long island haha

  • Author

Hey marc, i totally forgot to ask, if you dont mind, what are the specs on ur fence? Thanks again

If grizzly covers the cost of the machining, then i say kudos to them. If they tell you no, I say dump the griz and go gold. U have given them ample opportunities to satisfy your taste and they haven't been able to do so. Chances are, if you add future grizzly machines, you'll be doing this same dance down the road. Grizzly will soon have your picture up on their customer service wall with a note stating, "don't answer calls from this guy!"

Dont talk to me about over populated i live on long island haha

I couldn't live around that many people.  The traffic would drive me nuts.

Somebody can correct me if I'm wrong, but I believe Grizzly, Powermatic, Shop Fox, and maybe a few others are all made by the same Chinese factory, they just get different paint jobs, so aren't you splitting hairs by changing brands?

-From Grizzly's site-

Where are your machines manufactured?

Our machines are manufactured in several countries, but the majority of them come from Taiwan. We have dealt with factories in Taiwan for more than twenty-five years and have two offices with quality control engineers in Taiwan and China.

Typically Taiwanese export machining is a higher grade than Chinese export. This may be splitting hairs since many do not differentiate Taiwan and China but as a rule of thumb I would push away from Chinese manufacture in favor of Taiwanese if those were the two options.

The part that concerns me and has me following this thread: is this a casting or a machining issue? If the machining does not meet your spec then this is a personal preference issue and finer machining can certainly be found. If though you are dealing with castings that are warping post machining then I would really question any further castings from that run. I do not even know how to research casting batches out of Taiwan. I hope this all works out for you.

My father is a machine designer, and he has negotiated with Chinese factories (and others).  He told me that a big part of the negotiated price that the factory charges depends on the quality control and manufacturing tolerances specified in the contract.  So, you can have two brands made at the same factory to the same design, but one brand will be more reliable than the other.  Parts made for one brand that are rejected for being out of spec, can be saved and used for another brand that will accept them.

 

After the product leaves the factory, there can be differences in inspection, quality control, and customer service.  Not to mention packaging and marketing.  Two companies selling "the exact same product" can choose to position themselves as the high priced, high quality, product, or the low priced, economy product.  That's not to say the that high priced version is necessarily better, but it can be.

Somebody can correct me if I'm wrong, but I believe Grizzly, Powermatic, Shop Fox, and maybe a few others are all made by the same Chinese factory, they just get different paint jobs, so aren't you splitting hairs by changing brands?

Close but not really. Most come out of the Geetech factories. The differences go well beyond paint. For example the metal thickness. The base on the pm 12" jointer is nearly twice as thick as the griz. The same goes for the 20" planer. There are lots of small differences that add up to the big differences in price. I only know a few just compared to friends machines and past purchases but they are defiantly there especially once you get into the bigger machines. PM shapers come with a usable fence the griz comes with scrap metal. Even the power feeder that appear on the surface to be the same are not even close in machining quality. My old Griz shaper worked great but the fence was garbage but I knew that going in. The powerfeeder was sloppy and that was a bad purchase based on Internet reviews saying they were the same as the pm. I'm sure others have seen some differences here and there.

There is a reason the pm and sawstop stuff cost more money, its not the paint color. That's not to say all griz tools are going to have issues, every company has a lemon every now and again.

  • Author

The machine shop called this morning, and the fence is still the same as when it first went in, still bowed and twisted. He cannot resurface it since the travel of his machine is only 32", and he said it would be hard for the fence so sit right with all the webbing cut out in the back of the fence . I am waiting patiently for a call back from a grizzly supervisor. There is a dealer ten minutes from my house who carries powermatic, and i talked to him on the phone. He told me if there was ever an issue with a machine it would be him dealing direct with the company. That sounds like a lot less headache for me. Still up in the air but I am trying to weigh my options. Today is the last day for the powermatic sale, down to the nitty gritty here. Stay tuned!

The machine shop called this morning, and the fence is still the same as when it first went in, still bowed and twisted. He cannot resurface it since the travel of his machine is only 32", and he said it would be hard for the fence so sit right with all the webbing cut out in the back of the fence . I am waiting patiently for a call back from a grizzly supervisor. There is a dealer ten minutes from my house who carries powermatic, and i talked to him on the phone. He told me if there was ever an issue with a machine it would be him dealing direct with the company. That sounds like a lot less headache for me. Still up in the air but I am trying to weigh my options. Today is the last day for the powermatic sale, down to the nitty gritty here. Stay tuned!

....and the plot thickens! Keep us posted. The suspense is killing me!

  • Author

I have been on and off the phone today with grizzly. It almost seemed like one customer service rep wanted to give up and return the machine. I told her that i no longer had the crate since this has been going on for three months. I was told that i would be responsible for making a new crate with out of pocket expenses. I was all against that, and reminded them that I didn't want to return the machine, I just wanted a fence that was at least decent. I finally got a supervisor on the phone, and she was very understanding and said she would be working on getting to the bottom of this tomorrow morning. I explained to her that I was not as concerned about the bow as I was the twist, but come on, if these fences are being inspected upon request why are we still having issues. Like Vic said, he learned to work around the twist, but will eventually have the fence re surfaced. If I have a machine brand new under warranty, I want the good fence over the bad one. Thats not too too much to ask after paying what I paid for it. I decided to not run out and grab the pm sale after thinking it out all day. I just wasn't completely settled with the idea, therefore I couldn't justify spending the extra $600 after sales tax. Honestly, I love the machine. I just feel like they should do right by me after I purchased their high end 8" jointer, and the fence falls way short of machined standards. 

I just feel like they should do right by me after I purchased their high end 8" jointer, and the fence falls way short of machined standards. 

Don't let them try to convince you otherwise. You are fully within your means to get what is promised to you.

 

Either I am extremely lucky, or my tolerances aren't anywhere near as high as you. Either way, if I was in your shoes, with what you expect from the company, I'd be doing the same thing as you. Strive for the very best.

  • Author

So i had a wonderful experience today! My girlfriend and i went to grizzly, and returned the bad jointer fences. They let me go into the warehouse and check a new fence. I now have a damn near perfect fence and i could not be happier. I also purchased a g0690 table saw, went out to the warehouse and inspected it. The main tables and extension tables are within .005" and lower. Awesome!!! I gave the guy a thumbs up and we re packed it, ready to ship in the morning. I also grabbed a mobile base and 2 full kerf blades. I am happy as can be, great grizzly experience today.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.