Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Running out of steam

Featured Replies

I received my fourth!!! fence from Grizzly as warranty replacement parts, each one warped and twisted worse than the next. One was decent, but it was dropped during shipping and took out a corner and mushroomed the surface right by cutter head. I contacted customer service and for each fence an inspection was warranted, but what was actually inspected?? Not sure anymore. So I received a call from a tech, and he told me to lay the fence face down and apply weight to it for 24-48 hours and it will flatten out and stay flat. In my head i said "#$%^", but I humored the idea, and took the fence to my friends father who owns a machine shop. He checked the fence on his surface plate and found it to be .028" concave bow with a twist. He over extended the bow .020" convex and let it sit for 24 hours. Called me the following day that it went right back to where it started. I am now 3 months into my back n forth with replacement parts and I dont know what to do at this point. Should I have faith and hold out to maybe get a decent fence? Delivered to the house I paid $2345 for my G0495x jointer. Would you wait for good parts or would you return this machine and take advantage of the powermatic sale right now? The PJ882hh right now can be had for 2600, thoughts anyone?

IMO I probably would have had it after the 2nd return..  Personally I'd go for the gold.  Overall I think the PM is a better built machine and for roughly the same price (give or take) not much of a question.  :) 

 

But, I'm a little biased...

  • Author

Ok so i was browsing the web, and I found a site called www.pmctool.com and they had the pm pj882hh for 2500. When you add it to the cart they have an extra 100 dollar discount, dunno why, but it sounds good to me. I'm very hesitant about this decision, while at the same time I'm not fulfilled by my purchase. I know the green machines have had mixed reviews, but a lot of folks on this site have received good quality and are happy, its just not happening for me though. Other than the fence, I cant complain at all, Im actually quite pleased with the rest of it, but how many more fences are they going to keep on sending? Its like a game at this point. 

If you have access to a machine shop, why don't you just have your buddy's dad grind it flat?

Incra my friend....I bought a 1023RLWX and never installed the Grizzly fence.  I transferred my Incra fence system over to it. No more bump and measure. Set the hairline cursor on 4" or 4 &1/32 or 4&1/64th or 4"+10 thousandths and you're dead on.  Go to YouTube and look at the videos.  It works just like they say. Pricey but the best money I've spent.

+1 on taking advantage of machine shop access and get it flattened.  I have the 12" parallelogram jointer from Griz.  The fence is slightly twisted, but isn't an issue.  I have it square at the cutterhead and produce dead square corners on everything from very short boards to 12 foot timbers.

After owning a few different jointers over the years and using many more, I have adjusted my expectations for jointer fences. Frankly, a .028 dip (less than 1/32") is nothing to worry about. A bow will not impact jointing operations as long as the fence is square to the table. Now a twist is a bit of a different story. But depending on where the twist is and how severe it is, it too may have no actual impact. 

 

I think if we took a survey of all of our jointer fences (assuming we had access to a machine shop, :)) we would probably find that most of us have fences that are in worse shape than yours. But as long as the fence is square to both the infeed and outfeed tables along most of it's length, there's nothing preventing you from getting to work. 

 

I have talked with many woodworkers who do this dance with manufacturers and it tends to be a losing battle, primarily because they don't see that level of error as a problem. The same thing happens when a woodworker gets a set of feeler gauges out to test the flatness of their tablesaw. You might be able to squeeze out a replacement from the manufacturer, but you will likely end up with another table that has the same level of error. That's the nature of the beast when we're talking about cast iron from overseas.

 

I don't mean to say that all levels of error are acceptable. Obviously some can be very problematic. But the truth is, we have the ability to measure way beyond our actual needs.

 

As much as I'd like to see you go for the Gold too, I think you should set that fence up and put the machine to work. Joint a few boards, pull out your square, and check the work. The proof is in the pudding as they say.

Like a few have said, as long as you are square to the table (or within a good enough range), you are good to go. 

 

Even if you are 0.020" of an inch out of square, what harm will that do? On a 3/4" board, instead of creating perfect 90 degrees angles, you will create one 89.81 degree and one 90.19 degree angle. Over a distance of 3/4" on your board, I highly doubt that would be noticeable to the naked eye.

 

If you are happy with everything else, I think you can settle for a small amount of perpendicular bow to the fence.

Bow shouldn't be an issue.  It's your call.  I went thru 4 complete joiners before switching to gold.

  • Author

Wow guys, thanks for jumping in!

 

-Eric- I believe the fence is 36" long, his machine only accommodates up to 30" long on the bed. I guess they're set up for slightly smaller scale parts. 

 

-Timwood-  I was looking at the incra fence as well a few weeks back when I ran out of capacity on my 4100 ts, but couldnt see spending the money right now since I really want to upgrade the shop with a dedicated cabinet saw with sliding attachment or a smaller european slider. I have not weighed out which will best suit all my future needs, so it is still a work in progress, and see no ts purchase in the very near future haha

 

-Particleboard- I have 3 fences here at the house, the square will give different readings on each. The best one has a big lump in the face from being dropped during shipping, I was really upset about that, and it was my birthday too! 

 

-Vic- Please do tell more about this twist and how youve learned to live with it haha, Im jealous

 

-Marc- You have such a way with words haha. Thank you for jumping in and giving some great advice! 

 

Truth is, as much as some people may call me crazy, I want my little shop to be nice clean and UNIFORM!!! I want to stay with one company, this is just the way I want things, others with strongly disagree. I like the uniformity and the fact that everything is "cohesive" as my girlfriend says lol. What I am nervous about in my future of upcoming tool purchases, is the chance for similar problems  to happen. I certainly worry about the level of qc, and I have grown to cringe everytime I open a grizzly box no joke!!! You don't know what you're going to get. This is how I am looking at this situation as of right now, I am basing it more on the future of staying with this company or not. 

Grizzly QC could be better. I was lucky though, I had an extra fence rail with my table saw which is better than being short a fence rail. I don't think your crazy, nothing wrong with uniformity.

Ok, i just gotta weigh in here about the tech who told you to lay it down flat for 24-48 hours to flatten it and then it would stay flat.  I own a machine shop.  That is the single most ridiculous thing I've heard in 40 years of hearing ridiculous things about metal.  That guy just wanted you off the phone so he could go to lunch.  LOL

 

You definitely can flatten a metal bar by over-compensating in the opposite direction AND applying a little heat to it.  It doesn't take 48 hours, though.  It takes about 45 seconds, and it would be very tough to do with a cast iron fence that has reinforcing webs on the back surface.  You would most likely end up with ripples down the length of it and introduce a twist if it didn't already have one.  Grinding it flat is the way to go, but you kind of know that now.

 

I completely understand you wanting consistency with the tooling, but you may find that mixing and matching the best of the various manufacturers is the better way to go.

 

Oh, and we can all be pretty anal about specs.  I know I am.  I constantly have to tell myself that something made in my home shop doesn't have to be flat to .0001" like I have to deal with all day at work.  It's a struggle  :unsure:

 

I think Marc hit it dead-on.  If the fence produces edges that are only out so little that it doesn't affect the end result, then you're good to go.  Less stress, more wood.   :)

A uniform shop - I understand the sentiment.  I went through that phase when I first started getting a shop together, too.  And I quickly got over it.  There is something quite impressive and professional looking about a shop equipped with one brand...Marc's dream shop with the gold-lined walls and stacks of green is quite a spectacle and something to be envious of for sure.  But at the same time, there's something sterile about it.  It seems to lack coziness, or personality, or...something.  That's not a slam on Marc or his shop...every one of us would be in heaven there...and he has enough personality himself to make up for it.  But when you watch TWW clips on the free site, one of the photos in the intro is of Marc making a cut on some old table saw from one of his early early shops...and it looks like the kind of place I'd love to work.  Not quite enough space, not quite enough light, mis-matched tools...perfect.

 

I've developed a nostalgia for shops that are pieced together.  A small space, full of tools and materials, but organized.  Each machine was chosen carefully on its own merits for good reasons...availability, affordability, performance.  They're like your kids...you love them all.  Some are better and some are worse.  They have their quirks.  You know them well.  And eventually that hodge-podge of equipment becomes your story as a woodworker.  Each machine reminds you of a particular moment in your journey.  I don't think I'd have the same feeling about my shop if the whole thing was mono-brando.  Although I did buy a lot of one brand at the beginning.  But I'm open to anything now, and for recent and future purchases, adhering to the same brand is no consideration at all, unless it happens to be the right price for the right tool.

But at the same time, there's something sterile about it.  It seems to lack coziness, or personality, or...something.  That's not a slam on Marc or his shop...every one of us would be in heaven there...and he has enough personality himself to make up for it.

My interior decorator decided to hide my dust collector out back because it wasn't gold. :)

 I wouldn't judge my space too harshly just yet. I basically moved my tools in and started working on a big project. No cabinets, no real storage, nothing on the walls.... Just waiting for some time to open up in the schedule before I can complete my vision for the space. 

 

The picture you are referencing Eric is actually in David Marks shop before he added on the school addition. Funny thing though, your description of the perfect shop is exactly the opposite of mine. "Not quite enough space, not quite enough light, mis-matched tools." = Not a place I want to do woodworking, lol.

 

I tend to like my working, creative, and living spaces to be neat and orderly. I can totally understand what Freddie means. A shop can still be warm and cozy while having a sense of uniformity and cleanliness.

Don't take it the wrong way...you know I'm just jealous and bitter. :D

Freddie,

 

I'm hoping the titles of the four photos come across.  Basically, I'm out at the bottom on the beginning of the fence, and it twists to where I'm out at the top by the end of the fence.  I've squared large 6"x6"x12' timbers down to small boards.  The key is to play with it until you hit square, then lock it down.  I've found with mine, I periodically bump it too hard and have to readjust, but you get the picture.  Marc has videos on how you should feed and where your pressure should be, but the long and short is it works.  At some point I'll actually have the fence machined and welded at 90.  But, not having the fence perfect is not gonna stop the game.

 

post-8-0-89290200-1362881753_thumb.jpgpost-8-0-51348400-1362881756_thumb.jpgpost-8-0-63557900-1362881755_thumb.jpgpost-8-0-79507700-1362881754_thumb.jpg

 

Right now, it's cutting out of square just a bit.  But, I'll run a test piece and get it squared up before I try to square the next board I need to be dead square.  Also remember, if you are doing panel glue ups, to joint the two edges you plan to glue up simultaneously, so any discrepancy is zeroed out.

Ask Griz if they will cover the cost of machine shop flattening the fence? It has to be cheaper than refunding an entire machine, and possibly loosing a customer.

Ask Griz if they will cover the cost of machine shop flattening the fence? It has to be cheaper than refunding an entire machine, and possibly loosing a customer.

That is actually an amazing idea. Freddie, it can't hurt to ask. Considering they went through the trouble to send you 4 (I think you said?) fences, this might be an option. Then you know it is absolutely perfect to your specs.
  • Author

Thank you guys so much for the great information. Vic, i really appreciate you taking the time to provide the photos, they helped put me at ease a bit. I will call grizzly on monday morning, and since my friends shop can only mill 30" long pieces, i need to seek another local machine shop if thats what it boils down to. I will keep you guys posted, until then, im in brooklyn for my sisters birthday and about to hit the strip. After a few bars that fence will seem perfectly straight :)

Let me know how much that machining costs. I have a friend who can weld it once I get it where I want it. I'll never use it at anything other than 90*. I might as well tack it there. While my current setup isn't ideal, it does work and will produce square stock, but I'm extremely anal, so will address it at some point. I definitely went through all the anguish you are now before I figured out it will work. Keep us posted.

  • Author

Thank you vic. Youre from washington right? Too bad i didnt know about this wonderful craft sooner because i was stationed in washington for three years

What branch? Where were you stationed?

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.