Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Soft and furry wood - what kind of wood is this?

Featured Replies

Given the area (Michigan) guessing it's White pine (old growth).   

+1 on white pine, old growth, those trees were huge! So 24" planks would be quite possible.

In my area, the old growth from barns is Red Fir.  I picked up a good amount for extremely cheap a long while back.  It's great because it is very dry and doesn't move at all.  I made my bench from some of it.  Welcome to the Forum!

Soft and feathery simply means that the board were cut and used green. Green rough cuts leave fibers torn and hanging out similar to cuts in dry cedar.

  • Author

Thanks everyone! I will go with the majority - white pine. It is going to be a 9ft dining table. Will post picturesa when it's complete.

 

Anyone have any ideas on finishes that will not chnage the color of the wood drastically?

I've one old white pine on the back corner of our property.  Way back when they were logging they used to keep a few large trees as border markers.   These pics don't really do it justice, but the circumference of this tree is roughly 13'. 

 

I'm hugging the tree (Please hold the jokes :huh:) and my arms reach a little less than half way around..  I know they used to get much bigger than this, but it's the largest I've seen... 

 

If / when this thing ever goes down, I have no idea how I'll be able to mill this up.  It's almost 1/4 mile back through the woods :o

post-6031-0-35167200-1362940021_thumb.jp

post-6031-0-35508200-1362940035_thumb.jp

Water base finishes are the best to prevent changing colors on lighter toned wood. I think General finishes makes a good one. The finishes I use aren't sold to the public

If / when this thing ever goes down, I have no idea how I'll be able to mill this up.  It's almost 1/4 mile back through the woods :o

 

 

Could I suggest horse logging?  Of course you should wait until you need to do it ...

That is really the only option, and not really sure how feasible it is..  It's not so much a question of IF it can be done, but more of is it worth it :unsure: ? 

 

It's a heavily wooded property of fairly mature hardwoods (I think it was last logged maybe 50+years ago?) with a deep ravine through the most direct route.  In order to drag it out, the path would have to go all the way across the back border, then full depth..  Basically dragging each section 1/2 mile in distance (guessing 6-8 sections, 9' lengths) with a lot of obstacles....  Then the milling, etc.. 

 

I guess I have no idea what that would cost...  Realistically the tree will probably outlive me so it's probably a non-issue :(.... 

 

But, it would be cool to do if that time ever comes and I would swing it :) !

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,012 Total Members
  • 3,644 Most Online
  • JAR Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.