Freddie Posted March 15, 2013 Report Posted March 15, 2013 http://longisland.craigslist.org/tls/3677497554.html Found this online, and its 5 minutes from my house. I am not familiar with this saw but from the little information in the description, I found a few links online and I think it may be a right tilt which I am not too thrilled about. But for $750, and so close, it is worth it to at least go see the saw. Anybody on here know anything more about these saws that can provide info, it would definitely be a big help, thanks! Quote
Freddie Posted March 15, 2013 Author Report Posted March 15, 2013 Yea I found out last night that it was most likely right tilt, and I was like damn. Still wanna see what a $750 unisaw looks like though. Quote
sjeff70 Posted March 15, 2013 Report Posted March 15, 2013 Special edition too...I'm surprised he didn't post pics. Maybe he's an older gentleman. Doesn't hurt to ask the seller a few questions. Quote
Freddie Posted March 15, 2013 Author Report Posted March 15, 2013 I just went to see it, it was nice with a super long outfeed table, ran nice and smooth, but..... It was right tilt. I told him sorry, if it was left tilt i would have been loading it into the back of my truck and taking it home, but i had to say no. It had a pale blue cabinet, guess it was an older one, pretty cool Quote
CessnaPilotBarry Posted March 15, 2013 Report Posted March 15, 2013 After two of each, I only slightly prefer left tilt... Quote
Freddie Posted March 15, 2013 Author Report Posted March 15, 2013 I never used a right tilt before, i have only read about left tilt being safer and whatnot. Like i said, if it was left tilt it would have been in my shop already for that price, it was really nice Quote
Byrdie Posted March 16, 2013 Report Posted March 16, 2013 I've always had to adapt/learn to work with what I have/could afford. I don't see what the big deal about right tilt is. Safety is a component added by the person using the tool. I will admit that my saw is left tilt ... it was what I could afford when I bought it. Quote
wdwerker Posted March 16, 2013 Report Posted March 16, 2013 I have 2 right tilt UniSaw's . Only a very few times in over 25 years would the left tilt have been useful. I do one of a kind custom work so I put all my equipment to a wide range of useage on a daily basis. Quote
Trip Posted March 16, 2013 Report Posted March 16, 2013 ==> Only a very few times in over 25 years would the left tilt have been useful. +1 If you had the two side-by-side of both equal condition and price, then i'd take the left-tilt... But I've lived with both left-tilt and right-tilt for over a decade and can count on one hand how many times I benefited from the left-tilt for the operation at hand... If the saw is in as good condition as you describe, then $750 seems very reasonable... Quote
pghmyn Posted March 16, 2013 Report Posted March 16, 2013 What is the draw back of a right tilt? Quote
dwacker Posted March 16, 2013 Report Posted March 16, 2013 What is the draw back of a right tilt? Like the other said there is very little advantage to a left tilt. Cabinet guys like left tilt for the table space right of the blade. Personally I think it is and always has been more of an ego thing. It used to be pro saws were left and consumers were right. Guys just didn't feel pro enough or couldn't brag about their left tilt. Before the Internet nobody cared pros bought left and others bought the more affordable right. There are minor things that folks claim like motor access, crank position, spindle bolt side and direction but those are all things you get used to in ten minutes so I find them ridiculous to worry about. Quote
Eric. Posted March 16, 2013 Report Posted March 16, 2013 I'm no pro and it's not about ego or safety or convenience...left tilt is just what I'm used to and I wouldn't like the thought of changing to right. Same reason I don't bother using metric...my brain has been stuck on inches for 35 years. If I were a newbie and looking for a good deal on my first saw, left or right probably wouldn't matter to me. But at this point...right tilt...yuck. Quote
CessnaPilotBarry Posted March 16, 2013 Report Posted March 16, 2013 Case in point about getting used to things... One of my big left tilt "preferences" on my General 650, the right side location of the blade tilt handle, became moot on the SS ICS. Sawstop put the tilt handle on the left, even though it's a left tilt saw. I never thought about it being on the other side, until right now... I had to Google a General picture to remember! Quote
Freddie Posted March 16, 2013 Author Report Posted March 16, 2013 If I went for it, would I be able to flip it down the road without losing money? Quote
Trip Posted March 16, 2013 Report Posted March 16, 2013 It's already at $750 -- how much lower could it go? What's the bottom, $500? If you keep it in good condition, i can't see it slipping by much... It's a Delta Special Edition, after all... Quote
CessnaPilotBarry Posted March 16, 2013 Report Posted March 16, 2013 If I went for it, would I be able to flip it down the road without losing money? Probably... Used equipment almost always holds it's value, as long as it still performs it's purpose properly and looks decent. It's the new buyer who usually takes a hit. You can also attempt to negotiate, maybe $750 isn't his bottom line. I can tell you that in my experience, in the "offline" world, "American" brands, like Delta, Powermatic, and General (even if it's Canadian), do carry a bit of resale percentage value bump over Grizzly, older Jet, and other true imports, even if the actual tool isn't American made. I'm not sure I agree that this brand loyalty SHOULD be true, either way, but in my experience, it is... Brand opinions often differ widely among those who do and don't participate online. For example, almost every person I've met that had a negative "political" opinion of SawStop, also spent a serious amount of time online. Also, those with the most positive opinions of Grizzly, as well as those who tend to measure every setting on the tool with dial indicators before they mill any wood, also seem to have a lot of experience online. That's not a knock, just an observation. I spend a good amount of time online when traveling and away from the shop, and I also spend a decent amount of time with folks in personal situations, like advanced classes, guild meetings, etc... The more I pay attention to it, the more I can correctly identify those who spend lots of time talking about woodworking online, vs. those who rarely do, before I ask. It's uncanny... ;^) I once watched a guy who learned everything online, but hasn't built much, argue with Will Neptune that a pencil wasn't good enough to mark lines, because everyone online says to use a knife. If you haven't heard of him, this is Will: http://www.finewoodworking.com/item/105805/legendary-teacher-will-neptune-wins-cartouche-award Quote
Freddie Posted March 17, 2013 Author Report Posted March 17, 2013 Brand opinions often differ widely among those who do and don't participate online. For example, almost every person I've met that had a negative "political" opinion of SawStop, also spent a serious amount of time online. Also, those with the most positive opinions of Grizzly, as well as those who tend to measure every setting on the tool with dial indicators before they mill any wood, also seem to have a lot of experience online. That's not a knock, just an observation. I'm not quite sure what you mean by this? Quote
sjeff70 Posted March 17, 2013 Report Posted March 17, 2013 People are heavily influenced by the people they connect with, that's all. The digital age has given us easier access to information, but it is damaging to how we relate with each other in society. Example: I picked up supplies at a local HD and at checkout the young man was impersonal, quick and rude. He was impatient because he was on his phone. In a split second I was rushed the receipt and he was back on it. HD has Wi-Fi now and I guess their employees are allowed to surf while they work. Look at the causes and concerns of the growth and impact of online dating. The decline of taking pride in one's work (in the work place) has coincided with the digital age. A slow cancer. Quote
Freddie Posted March 17, 2013 Author Report Posted March 17, 2013 I understand what barry means by people who watch something, do not apply it, then tell people how to do it. I know this because I have a family member who does this constantly to me. Doing a reno on his house 2 years ago, he argued with me to the bitter end about how to do something, and I explained to him by trials and experience how to do it. His reply to me was " i know what im talking about, i watch the diy network!" WOW. As for me, everything I say or do is not talk, it is backed with experience or time in the shop. Go online and type in how to hand cut dovetails, go in the shop and practice. Not a pro at it, not even close, but I know where my weak points are and where I need to improve. I could not possibly know this by just reading an article. As for tools, research is becoming key because others experience with a tool will fill the gap where you were not able to demo or see the tool in person. I have also been finding that reviews can also be very biased based on perspective, brand loyalty, etc. Since the beginning of my jointer problems, I have run more than a sufficient amount of wood through each tool to justify my findings with straight edges, feelers. I am not a full time cabinet maker or furniture maker. I am a full time finish carpenter who found a love for the other crafts, and when the job calls for it I get to use my shop for those purposes. So to clear up any confusion, nobody is sitting on their computer over here looking for things to complain about. As for right tilt left tilt, have whatever opinion you want, it is my money and if i do not wish to spend it on a right tilt, that is my right. It is not a snobby indication whatsoever, it is just unfamiliar to me. I play right handed guitar, why the hell would i go out and buy a left handed guitar just because I found a deal on one. Not to mention this saw did not have a riving knife, I would prefer to have one. Why do I want a riving knife? Not because the internet tells me to, but I have had long boards pinch behind the blade on more than a few occasions, its no fun. Quote
pghmyn Posted March 17, 2013 Report Posted March 17, 2013 I understand what barry means by people who watch something, do not apply it, then tell people how to do it. I know this because I have a family member who does this constantly to me. Doing a reno on his house 2 years ago, he argued with me to the bitter end about how to do something, and I explained to him by trials and experience how to do it. His reply to me was " i know what im talking about, i watch the diy network!" WOW. As for me, everything I say or do is not talk, it is backed with experience or time in the shop. Go online and type in how to hand cut dovetails, go in the shop and practice. Not a pro at it, not even close, but I know where my weak points are and where I need to improve. I could not possibly know this by just reading an article. As for tools, research is becoming key because others experience with a tool will fill the gap where you were not able to demo or see the tool in person. I have also been finding that reviews can also be very biased based on perspective, brand loyalty, etc. Since the beginning of my jointer problems, I have run more than a sufficient amount of wood through each tool to justify my findings with straight edges, feelers. I am not a full time cabinet maker or furniture maker. I am a full time finish carpenter who found a love for the other crafts, and when the job calls for it I get to use my shop for those purposes. So to clear up any confusion, nobody is sitting on their computer over here looking for things to complain about. As for right tilt left tilt, have whatever opinion you want, it is my money and if i do not wish to spend it on a right tilt, that is my right. It is not a snobby indication whatsoever, it is just unfamiliar to me. I play right handed guitar, why the hell would i go out and buy a left handed guitar just because I found a deal on one. Not to mention this saw did not have a riving knife, I would prefer to have one. Why do I want a riving knife? Not because the internet tells me to, but I have had long boards pinch behind the blade on more than a few occasions, its no fun. I like tenacity when it comes to your decisions. I differed slightly from you when it came to what is "okay" with my jointer, but that doesn't mean you're a worse person than me. We all have standards that we like to live to, and your jointer fences have not me yours. Simple enough. I would love to see some of your projects. Do you have an online portfolio? Oh, and keep at it. I would rather get what I want instead of knowingly settle. Quote
Freddie Posted March 17, 2013 Author Report Posted March 17, 2013 I do not have a portfolio online yet, but you can see all my work if you are on facebook. I upload finished images along with progress photos. My most in depth furniture project was the cradle i built for my godson, which is also in the critique room. I am currently building a 11.5' long by 8' tall back bar wall unit, a more cabinet based project. Ill send my fb link later, im at the circus with my family Quote
Freddie Posted March 17, 2013 Author Report Posted March 17, 2013 http://www.facebook.com/freddie.ellis.9 Add me on fb, this is probably the easiest way to see the projects i have done. I am pretty sure my stuff is not up to par with some of the extremely talented people on this forum, but it is documentation of my small steps forward in the craft. Quote
CessnaPilotBarry Posted March 18, 2013 Report Posted March 18, 2013 Sorry I'm late getting back to this... The beginning of Jeff's reply above put it very succinctly, about where we get our information. It's not limited to woodworking, I've also recently seen it in cycling, aviation, even personal finance. Online forums are GREAT for information, but the sheer volume and unfiltered nature of the information tends to shape opinions in certain ways. Not right and wrong, but differently... It's really noticeable when you spend a good amount of time online, then spend a day with people who seldom, or never participate online, but have a great deal of experience in the subject matter. The online world tends to build group think extending to tool brands, features like right or left tilt saws, specifications, etc... differently than in-person, or even traditional print channels In the last half a decade or so, this has become more and more noticeable as forum traffic has moved from Usenet, and greatly expanded via the web. Lots of times, folks who spend lots of time online, including yours truly, tend to focus on things that those who don't aren't really concerned with. If a person who's knowledge was primarily gained online were discussing a machine with a person who doesn't know what web forum is, it's entirely possible you could both be correct in your questions and answers, but completely fail to communicate. I brought up the dial indicator example because 10-12 years ago, folks rarely took such measurements outside of the world of large industrial machinery. That's an Internet thing... Most folks would have simply run some stock to check the operation of the tool and go from there. It's not that a dial indicator isn't a great way to fix a problem that affects the quality of the work, but without valid pass/fail specs, the information is less valuable without knowing how the information you're collecting affects the work in the first place. This is not at all the same as accepting a defective or damaged item. I brought up brand names because someone who is good weeding through the volume of information online, can often get a good, or even better, tool, from one of the current importers, than a person who isn't good online, but is brand loyal to only what he has seen at the local dealer. This can work to your advantage if you pick up a used, "old guard" branded, tool that isn't your dream, by returning as much as possible at resale time, when your dream machine pops up. I just threw it out some thoughts as you look at used equipment. Hopefully, this clarifies things, as my earlier examples weren't clear. 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.