nateswoodworks Posted March 21, 2013 Report Posted March 21, 2013 I was wondering if any of u can tell me about what radius a round bottom spokeshave is? I need a good flat bottom and would like a round bottom but not sure exactly how much I will use it, not to mention not wanting to buy two at once. I figure I will buy a new flat bottom and take my current one (a cheapo Anant brand) that after a lot of work does work alright, and grind/file a radius on it. If I do use it as much as I think I will I will buy a good one but if it collects dust than this one will be just fine. I have toyed around with the idea of just getting Veritas' low angle since it is kind of both in one but I really like the 151 style more. Not sure if I will go with the Veritas or Pinnacle, honestly I am leaning more towards the Veritas because I like the looks a lot more and like the fact I can make my own handles for it. Nate Quote
TerryMcK Posted March 21, 2013 Report Posted March 21, 2013 My Veritas one is difficult to measure but I estimate it is between 2" to 2 1/2" radius Quote
nateswoodworks Posted March 22, 2013 Author Report Posted March 22, 2013 Thanks Terry, I hope to be able to work on it soon. Quote
TheFatBaron Posted March 22, 2013 Report Posted March 22, 2013 Lie Nielsen lists theirs as a 5" radius. I have a Stanley 63 (a smaller round bottom spokeshave) that's probably less than that, if I had to guess (unfortunately, I'm at work and going purely off of memory here so I could be very wrong). Quote
Vic Posted March 23, 2013 Report Posted March 23, 2013 Nate, I'll figure it out tomorrow. It's At least 4 or 5" for my Veritas. Quote
nateswoodworks Posted March 24, 2013 Author Report Posted March 24, 2013 Thanks alot guys, I ordered my new Veritas flatbottom so soon its surgery time for my cheapo! Quote
TerryMcK Posted March 24, 2013 Report Posted March 24, 2013 According to this website http://www.britishhardwoods.co.uk/veritas-round-spokeshave.html the round bottom one is 1" 3/4 radius. I cut a piece of paper as a template with a circle of this radius and can confirm. Quote
nateswoodworks Posted March 25, 2013 Author Report Posted March 25, 2013 Thanks for checking for me Terry, as always you guys are a huge help! Hopefully nextweekend I will get a chance to do it, painting both of my kids room this weekend,I hate painting but the kids make it fun. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.