Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

jury rigging shop vac for auto on/off?

Featured Replies

I want to dedicate one of my extra shop vacs for dust collection on my Kapex...and I refuse to buy another Festool extractor for this singular purpose.  But I'd like to be able to rig it up so that it turns on and off with the tool like the Festool extractors do.  You guys have any brilliant ideas for that?

  • Author

Awesome.  Guess I should have spent ten seconds researching.  :D   Thanks guys...perfect!

Or if you are cheap, just a regular power strip with get you a toggle switch for as many or few outputs as you want!

I just put a regular receptacle on a light switch, plugged my miter saw into one and the vacuum into the other socket. In order to use the saw, I have to hit the switch, and that turns on the vacuum.

  • 2 weeks later...

I have that Sears auto switch and it works flawlessly. Under $20 too.

I picked up the Sears one when Sears Hardware was closing their store near me.  I was trolling for deals and thought I would give it a try, so far it has worked fine for me.

I have the Sears and the I-socket. Hands down, it's the Sears for me. 

I have the one from Woodcraft.  It worked great for a while, then intermittently, now not at all.  This was with light use.

 

Cindy

  • Author

I have the one from Woodcraft.  It worked great for a while, then intermittently, now not at all.  This was with light use.

 

Cindy

 

 

I have to say...Woodcraft never fails to disappoint me.  My local store is a disaster and most of their house brand stuff is complete junk.  I go to Rockler 9 times out of 10 if I'm in a pinch and don't have the time to Amazon order...and Woodcraft is a little closer to my house.

I have to say...Woodcraft never fails to disappoint me.  My local store is a disaster and most of their house brand stuff is complete junk.  I go to Rockler 9 times out of 10 if I'm in a pinch and don't have the time to Amazon order...and Woodcraft is a little closer to my house.

 

Along those lines, I am in the market for an Air Cleaner.  Woodcraft has theirs on sale for $250, regularly $300.  Would it be a mistake buying it and if so, what would be a better choice?

 

Our Woodcraft is pretty nice and its prices are 10% cheaper than Rockler apples to apples.  However I get 10% off most things at Rockler by being in a woodworking guild.  So that is a wash, and Rockler has much more merchandise.  I am lucky that I live close to both stores, 4 miles from Woodcraft, 6 miles from Rockler.

  • Author

No idea on the air cleaner, Cindy...I'd open a new thread on that.

 

I think Woodcrafts are franchised, so I suppose they can vary some from store to store.  Ours in St. Louis is a real mess...clutter laying everywhere and they always seem to be out of stock.  And it's impossible to get any help from the guys there.  They're too busy hanging out in the back and yukking it up.

I am sure all WCs are managed differently - at least the franchises.  I'd like to think the corporately owned stores are somewhat more consistent.  That's too bad about your local ones - it's hard to keep loyal customers if they see no reason to stay loyal.

For me rockler is a mess. Small store and junk all over the place. Other service is really good. Willing to go the extra mile. I might spend 100$ at rockler.

Then there is wooddcraft. A great store always has what I need. They to will go the extra mile for service. I'll spend over 500$ easy at wood craft.

I ordered 2 of the sears. Hell for 16.99 I'll bye them all day of a 70$ one from either store

I made a switch for My router table and vac, but can be moved to any tool, magnets on the back.

The safety switch ($6.95) is the only part I didn't have laying around in the the shop. But if You have to buy all parts it would be under $10 (max $12)

I used a Safety switch and not a light switch because You can't knee or slap a light switch off and if Kids in the shop the safety key is great.

 

H8239 Safety Locking On/Off Switch

http://www.grizzly.com/products/Safety-Locking-On-Off-Switch/H8239

 

post-13759-0-69531500-1367014226_thumb.j

I am sure all WCs are managed differently - at least the franchises.  I'd like to think the corporately owned stores are somewhat more consistent.  That's too bad about your local ones - it's hard to keep loyal customers if they see no reason to stay loyal.

 

 

I like to visit WW stores as I travel the country.   I've seen the gamut, both in stock and service, in both WC and Rockler stores.    I've seen a few, of both brands, where I couldn't believe they were still in business, as well as others that belonged on the front page of the catalog.

 

My local WC is not a corporate store, but is owned by folks who own two locations and associated with a busy school.  I think the local location is even better than the best corporate versions, as it stocks many items not in the corporate catalog.  This seems to be mainly a result of the school, and the teachers and authors who travel in to teach at the school.   Some of the items stocked locally eventually appeared in the mother ship catalog.  The staff is quite good, all honest and very involved in the craft...

 

The school itself is a separate business, and includes it's own benefits, like 10% off LN, when purchased direct, but it obviously benefits the store and drives in traffic.  The school also hosts SAPFM meetings, open houses, and LN Tool Events.  I'm sure all this helps the store, too..

 

My local WC is not excellent simply due to a lack of competition.  Two large and busy Internet tool and machine dealers, both older than the Internet, have their brick and mortar stores nearby, and there was a successful Woodworker's Warehouse store across the street, until collateral damage from it's sister cooking-supply chain killed WwW. 

21JgaP5rXHL.jpg

Just a thought Doug...the safety switch could mount on top over where the wall switch would go.  Good idea though.  If kids are curious....yikes.

I have to say...Woodcraft never fails to disappoint me.  My local store is a disaster and most of their house brand stuff is complete junk.  I go to Rockler 9 times out of 10 if I'm in a pinch and don't have the time to Amazon order...and Woodcraft is a little closer to my house.

 

You are lucky that you have that choice on your side of the state. Your Rockler is the closest one to me. When I head down that way I try to hit it...but I think the guys there are rude.

 

And you are right, your Woodcraft is not very good.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.