ScoFF Posted April 18, 2013 Report Posted April 18, 2013 I have room for miter 1 saw in my shop and arsenal and am about to buy a Kapex. I’m choosing A Kapex because I have a basement shop and dust control is important to me, plus it’s a great saw that I’ll have for the rest of my lifetime hopefully. I have a Dewalt saw which I’ll be selling to help fund this purchase. My regular woodworking projects use tools that only ever touch clean hardwood, my miter saw is the one machine that ever gets to also see pressure treated wood for home reno, fencing, patio in the near future, a shed etc. My question is this, do you guys see a problem using a $1300 mitre saw for hacking up pressure treated wood, getting sap and whatever green treatment it has and then returning to fine woodworking? I know contractors use them all the time but it seems like I’m using a porche to go hunting. I suppose as long as you clean the blade and make sure you’re not cutting through staples it’s fine? How about those wheel around mitre saw tables that tilt the saw on it’s side? Will storing/wheeling the saw around mounted on it’s side throw it out of alignment or is this what a $1300 saw can handle? Quote
TerryMcK Posted April 18, 2013 Report Posted April 18, 2013 You won't go wrong with the Kapex. Like all Festool equipment they are designed and built to withstand the rigours of professional usage. If you look after your tools by cleaning them they will reward you with fine results. Quote
dwacker Posted April 18, 2013 Report Posted April 18, 2013 I wouldnt treat it like I would a cheaper dewalt and expect precision in the shop without having to readjust at least a little here and there. Id buy an elcheapo $100 special for the yard to use and abuse and leave the kapex in the shop. Quote
Nick2cd Posted April 19, 2013 Report Posted April 19, 2013 I think Don makes a good suggestion. However if u only have room and budget for one saw, I wouldn't hesitate on the kapex. It's made to cut pressure treated and s4s hardwood alike. Again, as he stated, I think u will want to check its calibration every so often, but my guess is, you'll almost never have to re calibrate. Quote
Trip Posted April 19, 2013 Report Posted April 19, 2013 ==> I wouldnt treat it like I would a cheaper dewalt and expect precision in the shop without having to readjust at least a little here and there. Id buy an elcheapo $100 special for the yard to use and abuse and leave the kapex in the shop. +1 get a DeWalt, et al from craigslist and keep the kapex for the shop. The accuracy is what you are paying for... It's not a beater... Quote
Barron Posted April 19, 2013 Report Posted April 19, 2013 I think the dust from pressure treated wood is far more dangerous then that "clean" hardwood dust. I'd use the Kapex and just change blades If you need to, but most pressure treated wood is pretty soft, so even that might be overkill. Quote
Dlhunter Posted April 19, 2013 Report Posted April 19, 2013 Dude, if you have a circular saw that's what you should be cutting pressure treated with. If you don't have a circ saw pick one up. Quote
JerrySats Posted April 19, 2013 Report Posted April 19, 2013 I just bought a Kapex and I like it very much , I use mine for finish work were precision is important . I'm with the others on not abusing it like you might a cheaper saw . I doubt it would last you a lifetime if make a habit of cutting 4x4s with it . Quote
Barron Posted April 19, 2013 Report Posted April 19, 2013 Marc can probably weigh in, but my sense is that Festool products are intended for commercial use, far heavier work than most hobbiest will ever use them for. Unless you are hauling the saw around in the back of a pick up to job sites, it will last forever. Plus, unlike a lot of tools at big box stores, you can repair these tools. Quote
Eric. Posted April 20, 2013 Report Posted April 20, 2013 Barron's probably right...it's a tough saw. But I use my Kapex only for fine work. It's too expensive to use as a beater. I have a cheapo Dewalt chopper for construction stuff. Quote
Alan Bienlein Posted April 20, 2013 Report Posted April 20, 2013 Honestly if your gonna pay $1300 for a chop saw it should be able to cut pressure treated 4 x4's and then go on to cut pieces for what ever type of furniture your making with out skipping a beat. After all it is a tool that's supposed to be made from better quality materials to be able to do these jobs. Quote
Tpt life Posted April 20, 2013 Report Posted April 20, 2013 Treated is theoretically not harder than hard woods to cut but is rather harder on blades due to impregnated metals. Treated should not be any harder on Kapex bearings or a waxed bed especially with good dust collection (a must in interior space). I would recommend keeping blades dedicated for each purpose and expect a Kapex to serve you well. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.