Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Home Depot Purebond Plywood

Featured Replies

I am looking to make a bathroom vanity out of walnut, but I am having a heck of a time finding a source for plywood in Pittsburgh. I seen that you could order hardwood plywood from H.D. but I am wondering what the quality of it may be. Has anyone used it? Or is there a source online that I could order from and have it delivered, without the delivery costing more than the plywood itself?

+ 1 for hhh's comments

Somebody has a better source and will help you out. There was a recent import levy on plywood from China. American made ply with walnut veneer is worth the effort and price. I have used Colombia and some suppliers in the Pacific Northwest as well as a mill in the Carolina's , all make a quality panel.

  • Author

Thanks guys! That is exactly what I had figured, but I actually have seen a few people gives positive reviews online, so I figured that I would ask. I have seriously looked online for about 5 hrs and haven't found a place that sells retail. Everyone I have called only sells wholesale. Just finding hardwood here in Pittsburgh is a challenge in and of itself. 

Pure bond is made by Columbia Forrest Products so it should be decent but face grade of the veneer is what you need to look into.

I think Colombia sells its low end product to Depot. Check with small cabinet shops, one should be willing to add your needs to his next order, offer to pay about 10% for his trouble. Go pick it up from him at his convenience so they have very little effort involved .

I have used the Pure Bond birch in the past. When it was first introduced some years ago at HD it was very good. No voids and face veneer was thick enough to take a few shavings with hand plane when necessary for leveling edge banding,etc. On all of my recent trips, it has been of a poorer grade, face veneer much thinner and voids apparent on the edge. Is it still better than the other plys stocked there, yes, but you should get set up with a plywood distributor. Typically there house brand is going to be better than the stuff at HD.

Consider Appleply too

Excellent suggestion, our equivalent of Baltic Birch. There is a local company down here that sells a chinese equivalent called Q-ply that was pretty good.

I see you have a Rockler in town, have you checked with them?

 

Rockler Woodworking and Hardware

7402 McKnight Road

Pittsburgh, PA 15237

(412) 364-7751  

Pat,

I had the same problem. Couldn't find a decent sheet of ply to save my life. I took some advice off this forum and checked with a local cabinet shop. I bought some directly from them. On top of that, they allowed me to rummage through their "scrap" bin and take all I wanted. It was like a jig haven in there.

I've used the birch and oak and it's OK, but don't try to use your dovetail jig/router or cut groves too close to the edge. The interior layers will split out like crazy.

  • Author

Thanks for all the info! 

Don, if I order the A1 grade, do you know if it is actually any good? From my understanding, the grading is just based on the appearance of the show faces, correct?

Doug, I have looked at rockler. They want $50+ for a 2X4 sheet. Seems sort of high to me. 

Nick, I really do need to talk to a cabinet shop about it, but I usually feel strange asking them.

Thanks everyone for the advice. 

==> Nick, I really do need to talk to a cabinet shop about it, but I usually feel strange asking them.

 

you should reach-out to establish a relationship.  They have all the big-boy-tools...  Someday, you may need access a wide-belt-sander and 24" planer...  A few $$ towards their 'sharpening fund' goes a long way and can get you access to equipment that you otherwise would not...  The key is scheduling -- always ask to stop by when they are not busy and offer to contribute some $$...  I think you'll find shop owners are happy to help...

Well, I had about 200lf of shelving to run through a 24" planer then the widebelt -- the shop spent almost an hour and surly consumed one timesaver's belt -- I offered to contribute and he only asked for $25...  He said it was for the 'sharpening fund'.  I noticed that he did change the sanding belt and those are about $25 each, so it seemed to work out for everyone...  but who knows, maybe it's for beer -- but he does run a tight ship...

Thanks for all the info! 

Don, if I order the A1 grade, do you know if it is actually any good? From my understanding, the grading is just based on the appearance of the show faces, correct?

Doug, I have looked at rockler. They want $50+ for a 2X4 sheet. Seems sort of high to me. 

Nick, I really do need to talk to a cabinet shop about it, but I usually feel strange asking them.

Thanks everyone for the advice. 

 

Rockler is insanely expensive. Purebond is what the vast majority of cabinet shops across the US use. HD A1 standard core is the same as any cabinet shop pure bond A1. They do offer a Kaycore but I doubt and cabinet shop would step up to it.  If your worried about telegraphing then order combo core. One thing to be aware of is that CFP does not service all HD stores. Call 1-800-438-6069 ask them for a price and see if they service your HD. If they service your HD you can get as good as you want.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,012 Total Members
  • 3,644 Most Online
  • JAR Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.