Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Video Shop Tour

Featured Replies

Here is a tour of my shop. I did really edit the video so it may be a little rough. 

 

 

Edited by Paul-Marcel
Embedded the video

  • Author

Thanks for the comments. It's not a big space but I am happy with it so far.

Paul- thanks for the help with the video

 

pghmyn- The Festools are nice. I have only used the Domino once but sometimes I wish that I would have gotten something else instead like an MFT-3 or Router table!

James, thanks for the tour.  Looking real good. Youve acquired some very nice tools.  Cute baby in the back ground too ;)

 

 

 

Nyles

Nice shop! I love watching shop tour videos, i wish more of us would contribute to this.

  • 2 weeks later...

cool vid.  thanks for doing that.  i love seeing how people have things set up.  great way to get ideas flowing

  • Author

cool vid.  thanks for doing that.  i love seeing how people have things set up.  great way to get ideas flowing

Thanks Nick. I also really enjoy seeing other woodworkers shops and how they set things up. 

Great shop and cool video. It's nice to see some shop tours in smaller spaces. Gives the rest of us hope! :)

  • 2 weeks later...
  • Author

Here are some pictures with a couple shop updates and additions. I added a dust collector, it's a Grizzly G0548ZP 2 HP Canister Filter DC. This meant I had to get 220v...somehow. The only solution I had was a dryer outlet located in the laundry room behind the garage and I was reluctant to use it. My current  housing situation does not allow me to add breaker or sub panels so I had to make this work. After some help from Particle Board, C Shaffer and few other I decided to relocated my 220 outlet and move it into a new box in the garage. I hate working with electricity, it makes me very nervous but I did anyway. It took me almost all weekend to get installed but I did have some other obligations that interfered with the progress. Anyway got it done and now have good dust collection. I bought the Dust Right Quick Connect kit from Rockler for my bandsaw and jointer but decided to have a dedicated hose to my table saw and I just installed a blast gate on that connection. I also recently added an MFT/3, a lot of money for a table but honestly I could use some more horizontal surfaces and it will work well with my existing Festools.

 

I also had a tool leave the shop which helped fund the dust collector and MFT/3. Now this is going to sound crazy but I got sold my Domino and Cutter Set. I must be the only one who was not in love with the Domino but I only used it once and that was to calibrate it. I just could not find ways to work it into project nor did I really want to put for the the extra effort to try and work it in. It was basically $1200 worth of eye candy for the shop and that drove me nuts  :blink:, so I decided to sell it and make good use of the funds for a few things that I really wanted and a knew would get use. 

 

My wife is out of town and she might not be the happiest gal in the world when she returns. It's hard to say what she is going to be more upset about; me getting a couple more tool or the fact that I relocated the dryer outlet  :unsure:. Then again maybe they will just cancel each other out. 2 negatives make a positive...right :P

 

I can't believe I was using a shop vac for so long. Night and day difference between the two. The dust collector makes my shop vac look like...well, a shop vac!

post-104-0-65330000-1370282118_thumb.jpg

post-104-0-39477900-1370282119_thumb.jpg

post-104-0-22987700-1370282120_thumb.jpg

post-104-0-95504300-1370282120_thumb.jpg

post-104-0-67381500-1370282121_thumb.jpg

 

 

 

 

My wife is out of town and she might not be the happiest gal in the world when she returns. It's hard to say what she is going to be more upset about; me getting a couple more tool or the fact that I relocated the dryer outlet  :unsure:. Then again maybe they will just cancel each other out. 2 negatives make a positive...right :P

 

 

 

Easier to ask for forgiveness than get permission. :)

Of all the tools that you chose to upgrade to 220, I think you made a good decision. You seem to be getting by just fine with your jointer and table saw. Sure, you are restricted to a little thinner of boards for the jointer, and maybe a slower feed rate for harder or thicker stock. But, when it comes to a dust collecter collecting more dust, that is more important.

 

Happy to see your shop evolution. Got a list of upcoming projects?

  • Author

Easier to ask for forgiveness than get permission. :)

I have asked for a lot of forgiveness this year  :D

  • Author

Of all the tools that you chose to upgrade to 220, I think you made a good decision. You seem to be getting by just fine with your jointer and table saw. Sure, you are restricted to a little thinner of boards for the jointer, and maybe a slower feed rate for harder or thicker stock. But, when it comes to a dust collecter collecting more dust, that is more important.

 

Happy to see your shop evolution. Got a list of upcoming projects?

I agree!

 

I am currently in the middle of two projects.

 

The Tilt-top table build and a steamer trunk.

I agree!

 

I am currently in the middle of two projects.

 

The Tilt-top table build and a steamer trunk.

I really hope to get a dust collection like you eventually. I have a lot of bills to pay off at the moment, and woodworking tools are at the bottom. So, I have a mobile HEPA filtration device that I sit near my tools when I am working. I noticed a HUGE difference form using this thing. After doing a considerable amount of ripping on my table saw with poplar, dust was everywhere in the air. I thought about this filter and brought it out. I turned it on and within 5 minutes the room was absolutely clear. Obviously I still wear a mask, but this is just a huge step forward from having nothing.

Great work James and a well equipped shop. My favorite part "that's the great thing about building your own furniture if you're not happy with it you can always destroy it"

The sad thing is.... sometimes that is more therapeutic then anything.  :D

  • Author

Thanks for the all comments, I think I am done fiddling with the shop for now. I am just going to work in it for a few months and see how I like the flow.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.