Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Red Oak Question

Featured Replies

When finishing, I often see recommendations to use grain filler (I think that is what it is called) prior to applying the finish. This is because of the open grained nature of the wood.

 

Is this necessary, or just preferred? Is this the same case in white and red oak, or just red? I have used red oak before, but never white oak. Are there any other woods where this is the preferred preparation before finishing?

 

I don't have any immediate plans with either of the two oaks, I would just like to know some opinions on the subject.

 

Thanks!

The pore filling process is used on open pored woods if you want it to achieve a smooth surface. Other woods besides oak can be filled (ash,& walnut are a couple). Any wood that has an open grain will have an unsmooth surface if coated with a film finish. The finish will soak down into the pores and a film will be built on the surface where the pores aren't. The glossier the surface the worse it will be. The pore filler will fill up the open grain and allow the film finish to go over the pores and look smooth.

Red Oak and Ash have very large pores and must be filled if you want a smooth glossy finish. White oak and some of the other woods with smaller pores can be filled with finish. After a couple of coat and sanding back they will fill the grain and yield a smooth surfacce.

This is not required if you are going to use a oil finish. You can probably get by with out doing it up to a satin finish but it really depends how the pores are. If you are planning on a semi gloss or high gloss you need to do th0is if you want a smooth even finish. I hope I answered your question. When in doubt fill the grain for glossy finishes.

  • Popular Post

I might be in the minority here, but I think filling grain is about the stupidest thing ever.  Let the wood be wood.  Satin varnish, oil, a few coats of shellac...all look fine on open-pored wood.  If you want a glossy finish, use a different species.  I guess I just never understood why someone would go through all that trouble just to make wood look like something it's not.  Hope I don't ruffle any feathers with that comment...it's just my opinion.  :)

I am with Eric. If I want plastic furniture, I would buy it. Here lately, I even work in bad spots and knots. 

Yup, I agree with Eric as well. I usually wet sand my finishes, and I think this fills the grain a little, but the wood still looks and feels like wood.

I agree with the above.  The only thing I would like to mention as my own personal opinion is that when using a high gloss finish on porous woods such as oak, mahogany, etc using some sort of filler and / or stain really does a lot for the end effect.  High gloss  finish really accentuates the abnormalities of the surface and unless it is glass smooth looks like Poo-Doo :blink: ..

 

However, when using satin or semi gloss on the same woods I prefer the texture / look and feel of the wood :P. 

  • Popular Post

Or you can use a contrasting colored filler to accentuate the grain. Stain and seal the raw wood then fill the grain with a darker or lighter filler to really make the grain POP.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.