Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Loosen block plane when adjusting blade?

Featured Replies

I know this is a rookie question, but I am a hand tool greenhorn. I just got a Stanley block plane to play with and I'm wondering if I'm supposed to loosen the lever cap (?) before I advance or laterally adjust the blade.

You should be able to adjust the screw that holds the lever cap to a point where the blade won't move as you use the plane, but will still move as you adjust the position of the blade.

If you can't find that spot, err on the side of being tight (i.e., needing to loosen the cap to adjust blade position).

  • Author

Graham,

this is the plane i bought.  i tried to find a classic on ebay but could never seem to pull the trigger.  i figured this would be a good plane on which to get started.  i won't be fearful of lapping the sole or de-burring other parts like i would be on a plane that cost 3x the price (of course these operations probably wouldn't be necessary on a higher end plane).  regardless, i just wanted something to get my feet wet.  i know it's not a LN or Veritas.  just something to get my foot in the door.  honestly, im impressed with it so far.  adjustments seem to be easy and solid.  

  • Author

Thanks Wilbur!  i can get it to that point where it's adjustable, yet tight enough to use.....i just wanted to make sure it's ok to do this.  something inside me keeps telling me not to adjust it against tension, but it seems like it's the best way to make precise adjustments.  just don't want to develop bad habits that will hurt better planes in the future.  

Thanks Nick,

 

To echo what wilbur says this type of block plane is very similar to a bailey plane in how you can adjust the with the lever cap under tension. FWIW that's a decent block plane which should be adequate for nearly all tasks. I have just finished refurbishing one of these which is a very basic type. Time will tell if it's adequate for what I want but it only cost about £7.00

I know this is a rookie question, but I am a hand tool greenhorn. I just got a Stanley block plane to play with and I'm wondering if I'm supposed to loosen the lever cap (?) before I advance or laterally adjust the blade.

Nick,

 

I own and use that plane almost every day. You don't have to loosen the cap before adjusting the blade. However, finding the sweet spot can be frustrating. I find that I keep the blade pretty much in the same spot, and just tweak it a hair as needed. Remember that, after backing off the blade to snug it up again. Otherwise the blade will continue to back off.

 

That plane is a real work horse. Just take a little time and take it apart. Check for any rough spots and file them. The sole and sides should already be pretty flat and square. I've had mine for over 10 years and I've dropped it off of roofs from 30 feet and it looks almost as good as the day I bought it! I do plan to install a new blade soon from L.N. or Hock soon.

 

Enjoy it !

  • Author

thanks guys!  this is exactly what i was hoping to hear.  i can see this plane being a spring board into more planes.  bench planes are next on my list.

 

Stephen,

how well does the stock blade hold an edge?  

The stock blade on mine has served me very well. I make sure the back is flat when I sharpen it. It can make shavings that you can see through :)

When I was just starting to play around with hand tools I had that plane, granted that was over ten years ago but I doubt much has changed. I have never had to loosen the lever cap on any plane I have had with the exception of Sargent with a knuckle cap. It is a nice plane to get you started and if I hadn't been given an old 60 1/2 that was my wifes Grandfathers I would still probably have mine but instead I gave it to a to a friend who still uses it today. Enjoy!

Check your setup. My plane of this style is a Stanley. The iron has slots milled into the bottom across 1/2 inch of the center. These slots line up with the adjustment mechanism. The lever cap only needs to be tight enough to keep the adjustment faces engaged and at that point the blade will not move during use.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.