G S Haydon Posted May 27, 2013 Report Posted May 27, 2013 I was wondering how many of actually adjust our flog to close or increase the size of the mouth? I must confess my work No 4 has always been as it was left from the factory. It's only now, with a renewed interest in hand tools, that i'm looking into closing the mouth to reduce tear out and improve finish on my personal tool collection. Quote
Tpt life Posted May 27, 2013 Report Posted May 27, 2013 Hey G, I adjust by default. I have yet to purchase a new plane so my first course of action has been to completely disassemble and inspect. I have not gotten into micro adjustment after use yet but I hope to play around with them more when school lets out. Quote
G S Haydon Posted May 27, 2013 Author Report Posted May 27, 2013 Hi C, I got a wealth of info from this thread http://www.ukworkshop.co.uk/forums/no-5-1-2-plane-clogging-really-easily-t70636.html . Got to the root of my "how do make a plane chatter" thread. They are certainly a very passionate/crazy bunch Quote
mkirby Posted May 27, 2013 Report Posted May 27, 2013 I only have a working jack and jointer at the moment, so I'm always adjusting the jack plane to help get a fine shaving. well as fine as a jack will get. Quote
TerryMcK Posted May 27, 2013 Report Posted May 27, 2013 I have 3 #4 planes. I have altered the position of the frog on all of them. My LN has the smallest opening and will take about 4 thou shavings max. I leave this for the best smoothing but even that can tear out on exotics and crazy grains. I could do with the 55 degree frog in that case. The other two progressively get larger openings, one used for heavier cutting and one used on a shooting board. My #5 has the widest opening by shifting the frog back and is obviously used for heaviest cuts. Quote
TerryMcK Posted May 28, 2013 Report Posted May 28, 2013 Hi C, I got a wealth of info from this thread http://www.ukworkshop.co.uk/forums/no-5-1-2-plane-clogging-really-easily-t70636.html . Got to the root of my "how do make a plane chatter" thread. They are certainly a very passionate/crazy bunch Yes they do appear to be passionate. One guy even correcting another guys grammar and making sure the world knew about it. I've never been very keen on that forum. Quote
G S Haydon Posted May 28, 2013 Author Report Posted May 28, 2013 Know what you mean Terry. The one thing it does have going for it is David Charlesworth's contributions which are interesting to read. Quote
wilburpan Posted May 28, 2013 Report Posted May 28, 2013 I've adjusted the frog position on bench planes, but that's a task that I think you should only have to do once, for the most part. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.