Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Walnut Log into lumber?

Featured Replies

I've got a friend that offered me a free log he's trimming off of a walnut tree this weekend. He say's it's about 20 feet long and 12" to 15" Dia.

 

I've always just gone to the lumberyard to pick up my material, and I've never taken a log to a sawmill before. Anybody have any advice on this process? I don't even really know how long it would take or how much lumber is in the log.

I would check around to see if there is a woodmizer owner in your area that can come to where the tree is now.  They can mill it right on site.

Call first, many mills will not touch wood they did not have a prior relationship with the harvester. They want to be as sure as possible there are no nails etc.

"free log he's trimming off a walnut tree" sounds to me like a branch.  Branches grow fighting gravity, so the bottom is pushing while the top is pulling.  When you cut a branch into a board you get lots of twisting and bowing.

 

Not based on my personal experience - just repeating what I've heard.

  • Author

I've got an email into my sawmill....they run a kiln and they'll surface the wood there too, and I will need all of that done. Just need to find out some rates...

 

 

"free log he's trimming off a walnut tree" sounds to me like a branch.  Branches grow fighting gravity, so the bottom is pushing while the top is pulling.  When you cut a branch into a board you get lots of twisting and bowing.

 

Not based on my personal experience - just repeating what I've heard.

 

This log is a big branch from a big, old walnut on his property. The branch overhangs some power lines so he's going to cut it this weekend regardless. He knows I'm a woodworker, so he offered it up for me. I figured I'd build him something out of it for his troubles.

 

Has anyone else heard this or know for sure about branch logs? I always thought the twisting and warping was due to a combination of grain and drying factors.

BC is right.  Branches tend to yield "reaction wood" that will not stay flat when cut.  If the milling is free, you could try it to see what happens, but I wouldn't pay to have it milled.

  • Author

I saw a picture of the branch to be cut and it has 4 significant bends in 20 feet. I told him I was going to pass on the free wood from the branch. Told him I was definitely interested in the trunk. It looks to be 4' diameter and close to 20 feet tall.

 

Also...the sawmill said they charge by the hour for custom sawing, and if they run into a nail, then they stop cutting, pull the nail, and start up again...all of which is charged by the hour (ends up being close to 70 cents per BF for smaller logs.)

Daniel, that's not a bad price for custom milling. Best of luck on the results.

Get the branch, cut some shorter sections from it with a chainsaw . Rounds for the lathe, resaw on the bandsaw .... Just seal the cut ends and air dry it. Weigh the sections and record it, when the weight stabilizes start checking the moisture content.

  • Author

I went to the sawmill today (http://www.dunham-hardwoods.com) and talked to the guy there some more about bringing in logs and green wood to get it turned into lumber. Got some great information there about how the whole process works and what they need and also what to expect when the log gets cut up. Great help there, and it was also fun to shoot the breeze with a fellow wood nerd.

 

Along the way I stopped by a tree service that had a pile of walnut logs laying out in the yard:

 

post-13786-0-90320500-1370716290_thumb.j

 

This pile had one large log about 24" diameter and 17' long. the other 4 logs were smaller...about 12"-15" dia. and about 7' long. The going price was 100 bucks for the big one, and 10 bucks ea. for the smaller ones. He said that was about 30 cents pbf.

 

I think that seems like a pretty reasonable price. This pile was already spoken for, but I told him I was in the market for any hardwoods that they come across, and they even offered to deliver the logs to a local sawyer for me (for a delivery fee). I called local sawyer and he said he charged $100 per hour to cut up the logs.

 

I know that the whole process will take some time, and some running around to drop off and pick up wood at different times, but the final esimated cost of the surfaced lumber would be around $1.00-$1.25 pbf when it's all said and done.

 

 

 

I gotta agree with Wdwerker on this one. 

If it were me, I'd take the branch. Don't look a gift horse in the mouth. I've had good luck with branch pieces, but you've got to be a little more patient and they usually take a little more remilling when you get them close to the size you want. But I believe you will be able to release that tension and make them work. For the price I'd say its worth the risk.

 

Just my two cents.

  • 1 month later...

If sawmill charges are low  then you can try to mill it .

I built the kitchen cabinets in our house out of such a log in 1980.  I had a mill saw it.  They said I'd have to pay for replacing any saw teeth if they hit anything, but didn't.  That was before I owned a metal detector, and they didn't have one either.

  • 2 weeks later...

You might check with your mill I use two different ones and they both will saw on the halves.  Meaning if I bring them logs they will cut them for half the wood for me so a free log stays free just some time hauling it.  If I want all the  wood one charges me 50/hr and the other 30/hr and I usually give the 30/hr guy enough extra to buy another blade.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.