Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Video shop tour.

Featured Replies

Good morning everyone, I was asked to post a video shop tour so I set out with my video camera and made one.

 

When I was making it, it seemed to go very quickly and I only hit the highlights of the shop, when I played back the video, it turned out to be 55 minutes! I broke the video down into 4 segments because YouTube did not allow me to go longer than 15 minutes when I started the upload process. I have mucked around a bit and I can now post longer videos but it worked out well this way as it is broken down into Overview, Wood tools, Forging and The rest of the shop.

 

As I type, 2 of he videos are available for viewing and the other 2 are processing and will be up soon, likely by the time anyone here links to the page anyway.

 

I must say that it is very nice now that the shop is clean. It took a few days to do as I had other "stuff" that need to be done also but now I find myself wanting to just go out there and sit in the middle and enjoy the view, I can say I can feel a little hesitation when it comes to doing work, it took so long to clean up, I don't want to mess it up again! Now that it is clean though, it will be easy to keep clean :D

 

http://www.youtu.be/9K9owLgKHSU

  • Author

C, Thanks, I owe it all to a fantastic, loving wife.

When we bought the property, twenty, cough cough years ago, we had intended to build a shop. I talked about it for years then one day the wife came to me out of the blue and said, why don't we refinance the house and build the shop you have always wanted.

 

She didn't have to ask twice! Interest rates were good and we put a good chunk down on the house AND the bottom had not dropped out of the housing market yet so we had lots of equity to take out. The shop took about $50K all up but that also includes things like the Bobcat that I used to level the lot. Some places had to come down about 4 to 5 feet and others need to be filled in even more so we got the money out of the Bobcat for sure. I had a buddy who I used to work with and he had taken a job with a earth moving company, he was the inspector on the jobsites to make sure the land was compacted properly. He came out and supervised me and my work in his "spare time" He even ran certified compaction tests and even right after the dirt was filled, we were running about 90% compaction, outstanding considering that the lot had not even had time to settle. This gave us a surface that was nearly as good as undisturbed earth!

 

 

The shop had never been designed with woodworking in mind so when I developed my "new interest" I had to make some big changes in layout of the shop. I need to maintain a drive space through the center of the shop to drive the Bobcat to access things on the top of the pallet rack and move items stored for my events so anything that is near the center needs to be on wheels. The wood tools are all on wheels except for the lathe and table saw, it should be no problem moving them to the entry door then turning on the fan to make sure the dust has an outward flow and not lingering in the shop. I still have dust collection for each tool where I can.

 

I need to do something to the 4x5 table in addition to the MDF, I need to add a vise to the side of the table and I am thinking about adding in a row of dog holes through the steel of the table. They can be a handy addition to working metal on the table if need be too.

 

Again, a HUGE thank you to my wonderful wife, without whom, this likely would not  have happened. OH, BTW, the kitchen got a full make over after the building was built so she got "something" out of the deal too, she didn't ask for it, it was the least I could do for her ;D

  • 2 weeks later...

Love the vitamix part. Made me smile! You have got quite a collection and a place to use it. Great work, hope you get those wood tools hot rodded soon! Also, nice work on the three phase. I plan to do that with some vintage tools soon. Your wiring arrangement is pretty clean

  • Author

Spencer, Thanks :D

Ya, I gotta get going on that "box" to justify all the rest of what is in there.

 

If anyone would like help on making their own 3 phase power, I would be more than happy to help. I have been doing it for about 20 or so years, 3 phase equipment sells for less on the used market because most people think they either have to change out the motor or they can't use the tool.

 

A basic converter is very easy to make and you can get as "into it" as you like.

 

I do have a book case I am going to make from the black walnut to be used in a bathroom for shelving. A buddy of mine who is into wood said that he thought that the purchased plans might not be stable in use (there is no back on it, only through M&T wedged on the top and bottom shelves) so I guess an inexpensive pine version is going to be made first for proof of concept. I have made a lot of stuff from metal but NOTHING from wood so it is all learning for me. I like that!

  • 2 weeks later...

Cal,

My deceased father-in-law was a woodworker. A few years after he died, his shop caught fire and partially burned.  His wood lathe took it on the chin.  I've been restoring it for a couple years now.  i have WAY too much money in it but it was his and my (still living mother-in-law who bought it for him in 1972) is very happy I am restoring it.  I got down to replacing the motor and had all sorts of options. A motor shop here was going out of business and I bought a 3 phase, 1HP motor for $25. (steal) I've fitted it with a variable Frequency Drive and so far, it's great - 5 Rpms to 1725 Rpms with the twist of a knob.  I'm just beginning to use it and may need to change the drive pulley but so far, I love the 3 phase approach. What you are referring to is building phase convertors? Rotary or static?

  • 2 weeks later...
  • Author

Tim,

I just got back from vacation, I made a rotary converter for my shop. A 3 phase motor that is 5/3 the size of your largest motor, Y wound and 1700 rpm works best. That and some oil filled capacitors and a voltage sensing relay is all you need. The relay is about $25 or so, caps might be found used for a few $ each plus the motor.

  • 4 months later...
  • Author

All work of any kind has been on hold for a while. I need to bring electric power to the East side of the shop, I was tired of using extension cords and when we built the building, I ran a conduit under the slab just to bring the power over. To do it "right" I ran 1/0 cables from the electrical panel to the sub panel and put it on a 100 amp breaker.

 

In order to mount the sub panel, I had to make a place to put it. This meant that I had to move everything away from the wall, frame it in with 2X4s then skin it over with 1/2" OSB.

 

After that was done, I ran all the electric runs, wired the outlets and cleaned up the mess. Next was to put everything back! I have most of it put away but as I set things up differently I now need to install OSB on the lower half of the West wall so a lot of stuff is getting moved out of the way for access.

 

Anyway, this is the newly setup hot working section. The bay is 25 feet by 30 feet. The wood working section of the same size is to the South and then the third bay to the south is for machine metal working.

 

So until I get everything re setup, the book case I started is on hold as well as all other projects such as the modernization of the Powermatic lathe. I have the motor and controller on the bench and they work well together.

post-14128-0-67186100-1386098587_thumb.j

post-14128-0-39036300-1386098608_thumb.j

post-14128-0-12753400-1386098641_thumb.j

Love adding functionality to the shop. I love how your shop has more than one trade in it :-) I love wood, but dabble in metals and welding. Useful skills hardly go underutilized, right?

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.