Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

New Shop

Featured Replies

Hello Folks,

 

New to the forum and I got a new work shop in progress.  I'd like to share what I have so far, as it may inspire someone, but also I need some tips as well.

The room is 14' x 11' and I have 2 tables against the back and 1 on the left.  A 4th table will be in the middle. This will be mostly for building RC Airplanes, but as I want to get into wood working, it will also be used for that.

 

One question I have is how to get the table top of the 4th table completely flat.  It is 3/4" x 36" x 72" plywood.  I was thinking putting 3/4" MDF on top of the plywood would give me a perfectly flat surface.  

 

 

Tables are modified version of the EAA table.  http://www.eaa1000.av.org/technicl/worktabl/tablefig.htm

 

I've got a build log on the Remote Control forum I use.  http://www.rcgroups.com/forums/showthread.php?t=1903483

 

Plan_B.pdf

 

post-14170-0-08005200-1371336579_thumb.j

 

post-14170-0-80395700-1371336426_thumb.j

In a room this small (mine's only 10x13) you need the two V's: versatility and verticality.  Versatility comes with putting as many things as possible on wheels.  Some things (such as heavy workbenches or tall, tippy drill presses) don't make sense to be wheeled. But overall you want to be able to move things around.  Verticality means availing yourself of all the space at neck height and above.  If something can be lofted up and off the floor, do it.

 

How many work tables do you need?  Horizontal surfaces attract stuff.  Stuff prevents you from working.

 

The walls beg for some sort of treatment.  At the least, paint them white to brighten the space.  Even though you'd lose a few square feet, you might consider ferring the walls and putting up plywood panels, allowing you to screw stuff onto the wall (again, verticality) without searching for studs.

 

How does rough material (big heavy boards) come into the space?  How do finished pieces (delicate and awkward) get out of the workspace?

 

Are there any other areas of the house that you can use?  If so, what operations in the workflow can be separated out?  I have a small corner of my garage with my planer and circular saw.  Rough stock gets broken down and smoothed before making the trip down into the basement.

 

Beyond that, start thinking about dust management.  Does this room have a window to vent to the outside?  If not, can you have one added?

 

Good hunting.

Having read your blog I see that fixing anything to the wall is out of the question. I still think that if you want a dead level surface, the best thing to do is watch Marc's video. Using t-nuts on the bottom of the support legs and adjustable feet will help to true up any unevenness of the floor.

http://www.carbatec.com.au/adjustable-feet_c21717

CAF-42_35_57.jpg

Good luck.

  • Author

Gentlemen, thank you so much for the replies!  I watched the video, I wish I had seen that before making all my tables  :( .  That looks really cool.  Unfortunately I don't have any of those nice power tools.  I did get the tables level with shims, i might have to check out those t nuts.  I think without those nice power tools, I don't have many options.   I will probably go with MDF top since its pretty flat.

 

Thanks!!

building furniture or other stuff that is large a flat table helps but for small stuff like rc plains you will probable be fine with mdf. where do you live maybe one of us can help you cut your stuff.

  • 1 month later...

Looks pretty good! I would paint the walls and ceiling white to improve the general illumination of the area. My shop used to be a photography studio and they even painted the floor white . I have to move next year and paint is high on my list before I move in.

  • Author

Cant paint, its a rental.  Everything is free standing or removable from the joists.  Maybe when I win that lottery that I never play, I can buy some land and build a 20 x 30 workshop  B)

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.