Llama Posted July 30, 2013 Report Posted July 30, 2013 After making a couple Shaker inspired end-tables, my wife wanted a matching table to go by the front door. I said, ok, went to the lumber mill, and came back with some nice Ribbon Mahogany. Here is what I have done so far... I will add a shelf and glue the table up tomorrow. 1 Quote
..Kev Posted July 31, 2013 Report Posted July 31, 2013 Wow, you did all that in 1 day? Looks awesome! Quote
Llama Posted July 31, 2013 Author Report Posted July 31, 2013 Wow, you did all that in 1 day? Looks awesome! Thanks! I tapered the legs the other day. Everything else was today. Quote
rodger. Posted July 31, 2013 Report Posted July 31, 2013 Looks great! Drawers would be a nice addition. Whats the plan for finish? Quote
Llama Posted July 31, 2013 Author Report Posted July 31, 2013 Looks great! Drawers would be a nice addition. Whats the plan for finish? Thanks! I am planning a sideboard which will have some drawers. My wife wants a shelf, so she gets a shelf In all likelihood there will be a couple of baskets on the shelf, but that's another story. For finish, I will apply three coats of boiled linseed oil followed by a coat of wax. Quote
Llama Posted August 4, 2013 Author Report Posted August 4, 2013 Here is an update. I messed up with the aprons. I forgot to cut the groove, so I have to use those figure 8 clips now. Everything is glued up, ready for the table clips and finish. Quote
Byrdie Posted August 4, 2013 Report Posted August 4, 2013 Since you're going to use clips I'm guessing that means the top isn't glued on. The grooves don't need to run the full length, just in the area where you're going to use your mounting bracket. Take the top off, lay the table on its side and cut a groove. You can use that fancy "new" fenced plane you got or chisel a groove and clean it up with one of your router planes. Quote
Llama Posted August 4, 2013 Author Report Posted August 4, 2013 Good idea. I'm sure the 45 would do a nice job. I'll practice on some scrap to get the distance and width correct. Thanks! Quote
Indy Cindy Posted August 5, 2013 Report Posted August 5, 2013 You can also cut a groove with a biscuit cutter. That works very well and is easy. 1 Quote
Llama Posted August 8, 2013 Author Report Posted August 8, 2013 Ok, finally had decent weather for adding some finish today! I should be able to wax this one tomorrow morning! Quote
pghmyn Posted August 8, 2013 Report Posted August 8, 2013 What's the drying time between coats of Linseed Oil? Quote
Llama Posted August 8, 2013 Author Report Posted August 8, 2013 I waited about an hour to sand the first coat, then I added another coat. Probably should wait longer though. I'll let that sit overnight, and add wax in the morning before going to the state fair. Quote
Llama Posted August 8, 2013 Author Report Posted August 8, 2013 Oh yeah, just so you know... BLO is flammable. Let your rags for out before balling them up. Ask me how I know Quote
Chris H Posted August 8, 2013 Report Posted August 8, 2013 Looks great Mel! What kind of joinery did you use on the aprons and shelf? Quote
mikem Posted August 8, 2013 Report Posted August 8, 2013 Yikes! Did they ignite, or just hot enough to start smoking? Quote
Llama Posted August 8, 2013 Author Report Posted August 8, 2013 Yikes! Did they ignite, or just hot enough to start smoking? Started smoking! I'll post a pic later. The funny thing is, it smelled good Quote
Llama Posted August 8, 2013 Author Report Posted August 8, 2013 Looks great Mel! What kind of joinery did you use on the aprons and shelf? I used dowels for everything. Figured I'd try them out. Quote
mikem Posted August 8, 2013 Report Posted August 8, 2013 I use boiled linseed oil a lot myself, fortunately have not had any incidents with it. Glad to hear you caught yours before it could cause any damage. I have heard of a number of shop fires caused by balled up oily rags. Quote
Llama Posted August 9, 2013 Author Report Posted August 9, 2013 I am going to frame this! It really looks awesome Quote
rodger. Posted August 9, 2013 Report Posted August 9, 2013 I may make a similar table, but out of walnut. Would you mind posting your dimensions? Quote
Llama Posted August 9, 2013 Author Report Posted August 9, 2013 Absolutely. I'll measure it later Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.