Recommended Posts

Posted

I'd had enough of hanging blades on nails driven into the walls of the shop. I got a pdf as part of Pop Wood subscription called Workshop Storage Solutions (I mentioned it in a previous post on the forum a week or so ago).

Anyway in there is an article by Steve Shanesy on making an open fronted box to store your table saw blades.

 

I just bought a few more blades so decided to make the box. It comprises 4 sides of 3/4" ply and I made the back from 1/2" ply.

The shelves are just 1/4" thick ply and the box is intended for 10" diameter blades.

 

The finished size is 8" high x 11 3/4" wide x 11 1/4" deep.

The box is very simple rabetted construction just glued with some yellow glue (no brads ;) ) 

The shelves are around 11/16" apart in dados cut in the sides. They have shaped front edges with a cutout so you can grasp the desired blade.

The front is cut at an angle of 70 degrees and there is an internal partition of 1/4" ply also at 70 degrees.

I can't publish the plans as they are probably copyrighted but I can show you some photos of the results.

 

post-3084-0-50246700-1375802562_thumb.jpBox construction

post-3084-0-04474200-1375802587_thumb.jpShelf routing detail

post-3084-0-89817800-1375802618_thumb.jpFinished shelves

post-3084-0-16475800-1375802643_thumb.jpConstruction complete with 3 coats of shellac

post-3084-0-87452300-1375802669_thumb.jpOn the wall with a few blades

post-3084-0-04757300-1375802685_thumb.jpIn situ in my shop.

 

It took around an afternoon to make last Saturday and I now have a great storage place for my blades. I mounted the box to the wall with a French cleat. You could easily just put it into a drawer to keep the dust off.

  • Like 1
Posted

Very nicely done.  I've been drawing up plans that are somewhat similar except the front isn't open.  Not rushing to get it done, however.  Need to get on it, I guess.

Posted

Just a little style I guess rather than a boring square fronted box. My wife went "wow" so I think it must be ok ;)

You can see each blade with its corresponding tooth count at a glance without extracting them.

  • 1 month later...
Posted

Just goes to show how long circular saws have been with us now when you see a "vintage handmade round saw blade holder"! I wonder if in the future there will be a dude doing demos on a table saw "like they used to do", cursing the rise of 3D printers et al.

 

53ae6625b6ddc6f7ed829009e20f32fd.jpg
  • Like 1
Posted

 

Just goes to show how long circular saws have been with us now when you see a "vintage handmade round saw blade holder"! I wonder if in the future there will be a dude doing demos on a table saw "like they used to do", cursing the rise of 3D printers et al.

 

When a plotter can produce medullary rays I think the lot of us will be pushing up daisies ;-)

 

  • Like 1

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Who's Online   1 Member, 0 Anonymous, 61 Guests (See full list)

  • Forum Statistics

    32.1k
    Total Topics
    437.6k
    Total Posts
  • Member Statistics

    26,009
    Total Members
    3,644
    Most Online
    Joseph b
    Newest Member
    Joseph b
    Joined