playsk8r Posted August 9, 2013 Report Posted August 9, 2013 Hello guys, I just joined today, and this is my first post(and an introduction).my name is Alex(playsk8r) and I'm 14. Yes, you read that right, 14. As a young kid, I always spent tons of time in my grandfather's shop. By the age of 7, I was helping him with things around the shop. I also had a fascination with mechanical things, I always took everything broken apart, in fact, most weeks, my bedroom floor would be littered with machine screws . When I was ten, I got my own very basic hand tool shop. For a while, I didn't care about it. That all changed last summer. I spent several weeks at my grandparents cottage, where my grandfather's shop was. I learned to operate all the machines independently, yes the table saw still scares me a little, but I use it no problem. I soon realized that I loved woodworking. During this christmas break, I turned a bowl, and it went from there. I joined OWWM, realized that I hate all new tools(except the new unisaw and the General 350/650, Italian Laguna's Felder's...) memorized several Delta catalogs, joined OWWM, marveled at everyone amazing resto's. I now have a bunch of power tools, and I am done the restoration of my wood lathe, and almost done the restoration of my grandfather's c-man table saw. Also, I've inherited all of my grandfather's tools because the cottage became too much work for him, and is now sold:(Well, thanks for reading my long post, and thanks for sharing your passion with me Quote
..Kev Posted August 9, 2013 Report Posted August 9, 2013 Welcome Alex. There's some great people here and lots of good advice. I hope you enjoy all this place has to offer. Quote
JerrySats Posted August 9, 2013 Report Posted August 9, 2013 Welcome to WTO glad you joined the group here , you'll fit right in . Share some pics of your old tools . Quote
Byrdie Posted August 9, 2013 Report Posted August 9, 2013 Welcome Alex. Nice to hear about your work on the old tools. I look forward to seeing what you can do with them and getting your advice on my woodworking problems. Quote
duckkisser Posted August 9, 2013 Report Posted August 9, 2013 always good to have fresh blood to see problems and new solutions. you will have a wide experience base here to draw from everything from cabinet building to fine carving and inlay . to be honest the table saw scares me as well. my advice keep trying stuff till you find what's perfect for you. buy the tools as you need them and buy the final tool first so you don't waste money. always ask questions. the worst thing you can do in a shop is bring your emotions to the classroom if you're upset, angry, tired etc....then just walk away or pick up a broom. and best advice I ever taught my students is that take your time and think about safety you can only make 10 mistakes in wood working. (ten fingers). Quote
wtnhighlander Posted August 9, 2013 Report Posted August 9, 2013 Welcome, Alex! I bet if you were to ask, you would discover a large portion of us 'inherited' the love of the craft from our grandfathers. I can only hope to inspire a grandchild of my own some day. Enjoy the forum! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.