Recommended Posts

Posted

No no steve, the drawer fronts will overlay that frame. Then frame is set back one inch from the cabinet front. The drawer fronts will be 3/4", giving the drawer fronts 1/4" reveal from the front of the case. 

Posted

I haven been on google looking at retro teak cabinets, and it seems pretty 50/50 with the drawer fronts to have the grain running either vertical or horizontal. I think it could go either way on these cabinets, but I think now that this grain begs to be run vertically. Suggestions anyone?

Posted

I finished my drawer dividers and slider supports. There will be 2 under mount slides as I don't want anything interfering with the look of the dovetail drawers. I also cut the back panel to fit but am leaving it off for now to make my life easier when working inside the case. Tomorrow I just have to edge band the front and back of the cabinet, and then it's off to the races making drawer boxes!

 

- Today I found my coffee cup to be the perfect height for supporting my tail board to mark out my pins. :)

post-3732-0-31818000-1378438547_thumb.jp

post-3732-0-24190000-1378438555_thumb.jp

Posted

Excellent Freddie. The simple design he really does not do justice to how clean you have been with your joinery. Anytime a client of ours wants those ultra clean lines you know that although it's looks simple it just has to be ultra neat and tidy. Very well done indeed sir!

Posted

Thanks guys! Here is a picture of the pulls that will go on the four drawers. I am trying to make good time and get this build done and into the spray booth by sunday the latest. My head is spinning but we will get there soon hopefully. 

post-3732-0-43887600-1379117793_thumb.jp

  • Like 1
Posted

Drawer fronts installed and ready to fit pulls. I swear if you look at the picture long enough your mind can play tricks on you and say the gaps between the drawers vary, but I assure you they are all the same. Damn angles :)

post-3732-0-58786300-1379118153_thumb.jp

Posted

Thanks guys! Here is a picture of the pulls that will go on the four drawers. I am trying to make good time and get this build done and into the spray booth by sunday the latest. My head is spinning but we will get there soon hopefully. 

 

These look awesome!  Did you make these Freddie?

Posted

No Tiods, I did not make these. They were ordered from boaters land. Same species, and a similar shape from what I can tell in the old pictures, couldn't say no. I'm not making a killing on this job, so it wasn't appropriate for me to invest time into shaping pulls. I did however, absolutely want to put the hand cut dovetails into this project, that was an absolute must for me, and I think I spent wayy too much time on them. 

Posted

I really like the pulls, can you post or pm me a link?

 

Those will look awesome on the killer job you did on this project!  Excellent eye for detail Freddie!

Posted

Freddie, this really looks great. You've obviously spent a tremendous amount of time on the little details and it shows.

 

Were the original cabinets custom, or mass produced? I suspect you're going to deliver something that's a much higher quality than what it replaces, and I'm certain the client is going to love them.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Who's Online   1 Member, 0 Anonymous, 68 Guests (See full list)

  • Forum Statistics

    32.1k
    Total Topics
    437.6k
    Total Posts
  • Member Statistics

    26,009
    Total Members
    3,644
    Most Online
    Joseph b
    Newest Member
    Joseph b
    Joined