Tony Wilkins Posted September 19, 2013 Report Posted September 19, 2013 ...when you follow the sage advice of centuries of woodworkers and craftsmen things go better. Got ought to my workshop for the first time I have it setup ((mostly). Finally found a candle and darned if rubbing it on my planes and saws didn't make it easier to use them. Haven't built my saw bench but found a steel cabinet that's just slightly too high. Darned if it isn't easier to saw at that height. Side note: the more I use my disston D8 thumbhole rip and crosscut saws the more I find them a joy to use. I'm back to worrying about screwing it up if I try to sharpen the rip lol. A couple of other notes from a couple of days of actually being able to woodwork... I've been really successful planing with my veritas 5 1/4. I hope practice makes better because my attempts to saw straight look like they were done by a blind, drunk monkey working on a dinghy in rough seas. My apologies to any blind, drunk monkeys out there. 2 Quote
G S Haydon Posted September 19, 2013 Report Posted September 19, 2013 Glad to hear your having fun and your apology is accepted Quote
Llama Posted September 20, 2013 Report Posted September 20, 2013 Tony, Have you seen the stuff by Chris Schwarz about the three classes of saw cuts? It may speed up the learning process with sawing straight lines. And for the wax. YES! I couldn't believe how much of a difference it makes. I use the canning wax I bought in a grocery store, looks like that little box will last me a lifetime. Quote
Tony Wilkins Posted September 20, 2013 Author Report Posted September 20, 2013 I've watched that episode of The Woodwright's shop quite often and learned a lot from it. Cross cuts I'm good on; it's the long rips that I have so much trouble with. I've tried the 'English Bench' and "French sitting" methods but the grip to do that easily eludes me - maybe it's my lack of strength. Just got CS's sawing video a couple of days ago, need to watch it again and see how much I can mine from it. 1 Quote
Llama Posted September 20, 2013 Report Posted September 20, 2013 I have learned lots from Roy Underhill! That underhand grip is something I don't even know where to start! Quote
Trip Posted September 20, 2013 Report Posted September 20, 2013 ==> +1 for canning wax I'm not a heavy-duty hand-tool user --- I use them when I need to, but they really aren't my 'go-to' solution... so I frequently forget the basics... I was planing some stock and really having a tough time of it... When I got done, I put the plane back in the till and happened to see the bar of wax -- a mere 5" from the heal of the plane I had just finished using... D'oh... Hate when that happens... 2 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.