Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Look what I found out during my clean out of my barn

Featured Replies

It certainly could do with some serious rust removal.

 

There might only be a handle left if you take off the rust. :rolleyes:

hhh that's a nice link that's new to me, thanks!

 

Andrew, all is not lost, in addition to hhh's link take a look at this http://logancabinetshoppe.com/blog/2013/09/one-way-to-clean-a-saw/. Your saw although rusty, has a nice handle and it's reasonably unused. 

 

I think the saw is most likely a British made saw http://www.disstonianinstitute.com/faq.html#ws . Clues to this are the fact the back is straight, not skewed which is typical of American made saws.

 

As with most vintage tools at the moment don't get rid of them hastily. You only need someone with an audience to promote the inherent quality of the right vintage tool and the value shoots up. Molding planes are a good example. 

 

It's a good one to practice sharpening on too. Just don't junk it (unless you want to, its your saw  :)) 

 

Take the handle off and put the plate and the nuts in a tray and cover with white vinegar. Leave over night and it will come up a treat, you will know if the plate is salvageable after that. 

Yeah thats where i got it from. You posted at the same time as me :)

You would be amazed what a saw like that might do once you clean it up and sharpen it. Be careful who you get to sharpen it , make sure they understand old handsaws.

==> Be careful who you get to sharpen it

 

If the saw doesn't clean-up nicely, you may want to keep it anyway to learn how to sharpen saws yourself...  I'm just learning at the moment, and having an 'old beater' practice saw assists the learning process... Actually, I think it's rather essential...

  • Author

==> Be careful who you get to sharpen it

 

If the saw doesn't clean-up nicely, you may want to keep it anyway to learn how to sharpen saws yourself...  I'm just learning at the moment, and having an 'old beater' practice saw assists the learning process... Actually, I think it's rather essential...

 

This was my thought process. And even after that if it won't hold an edge properly, I can always use it as an ornament.

 

Incidentally, what type of saw is it? I know nothing about handsaws! I'm mostly a power tool user.

A panel saw is a shorter version of a regular handsaw.  This saw looks like a full sized saw to me.  I can't tell what the tooth geometry is from the picture, but the teeth look large enough for it to be a rip saw.  it is possible that it is a larger toothed crosscut saw, but we need a closer up picture.  A lot of times back then, crosscut saws had a 26" long blade, and rip saws had a 28" blade, although there were a lot of 26" rip saws too.  If the teeth are filed straight across, it's a rip saw.  If filed at an angle, it's a crosscut saw.

 

There were plenty of straight backed saws made here too.  This saw looks like a lot of old ones from the mid to late 1800s, with the shape on the end top of the end, unless that's just a funny shadow in the picture.  It probably had a nib too, but that doesn't show in the photo.  I bet you can find remnants of a nib though if the end is shaped down.

 

If you read the link I posted earlier in this thread, you see what a warranteed superior saw is.  These were the saws that hardware or general merchandise stores sold-not the top of the line saws from any manufacturer.

 

It doesn't look like it's been sharpened much, or maybe not at all.  It can be brought back with a lot of work, but it still won't be a valuable saw.

==> This saw looks like a full sized saw to me.

that could very well be...  If the handle is regular sized (which I should have noticed), then you're spot-on...

 

 

==> It doesn't look like it's been sharpened much, or maybe not at all.  

+1

I have good results refinishing saw handles, and plane totes and knobs, with Tru oil.  It's for gunstocks which are made to be handled.  You can even buy it in Walmart.  The handle looks like it's in really fine shape.  The newer saw handles pale in comparison to these old ones.

  • Author

The handle certainly feels comfortable as it is with no work at all.

 

From memory it doesn't have any set to the teeth, nor are the teeth sharpened to an angle. But that could be because there's 1/64th of rust on the edges and I didn't look that close. I'm probably going to clean off the rust with white vinegar and take some more photos. It's a small amount of time and I can make a decision from there.

 

If nothing else, I can use it as an ornament along with my 7 1/4" circular saw blade turned into a clock.

Just to say Andrew my idea on skew back USA - straight back UK seems a bit wide of the mark. Picked up a vintage Spear and Jackson (UK maker) this evening and it has a skew back..........

 

Also a fun little sketch of hadsaws and their names

 

b9d229784fcad6ce6f348c14a340473c.jpg

Picked up a vintage Spear and Jackson (UK maker) this evening and it has a skew back..........

 

Also a fun little sketch of hadsaws and their names

 

 

Congrats, any pics?

==> fun little sketch of hadsaws and their names

 

Seems to me that "double edge handsaw" is just asking for trouble...  Further, the "Ice carver's saw" would be a good prop in a slasher film...  Aside from those two, I think I've actually got the rest...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,012 Total Members
  • 3,644 Most Online
  • JAR Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.