Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

What? Surface plane MDF?

Featured Replies

The verdict is in!  No problem at all!    Nothing exploded, no extra dust or mess was noted, the planer left a nice surface, and my toilet still circles in the same direction as before when flushed, so the earth's rotation did not change.

 

I took identical cuts using matching widths and thicknesses of 3/4" MDF and red oak.

 

Before:

 

IMG_1627_zpsad1ec26a.jpg

 

After:

IMG_1635_zps3bdd31e9.jpg

 

Awful Video HERE

 

I only added the video to share the sound and actual planing...   Sorry about the quality.

 

I wouldn't hesitate to do this in the future, if I needed to fine adjust MDF thickness.  I wouldn't plane 3/4 to 1/4, but even with HSS, I didn't see a problem.  I'm sure carbide inserts wouldn't be phased much at all.

I've always been told if man made it it doesn't go in the planer or jointer. I think I'll stick with that advice.

==> The verdict is in!  No problem at all!

 

I'm amaized.  I thought it would just been a mess...  Learn something new every day...  I certainly wouldn't make a habit of it...  It's got to be hard on the knives...  Maybe for a one-off...

Ladies and Gents, I found the FWW article and can provide some context...

 

  • The writer suggesting planing MDF is Marc Adams.  Right off the bat, there's quite a bit of cred...  This is quite different than a "Methods of Work" tip, or something similar.

 

  • The insert he's describing is for a miter saw, not a table saw.   These are the inserts held in place by countersunk flathead screws, without the adjustments a table saw insert would include.  He mentions planing 1/4" MDF to the necessary thickness, if your saw requires an insert that is slightly thinner than 1/4".

 

All in all, I was surprised how well it worked.  There are also a few interesting tidbits in the Canadian Woodworking link, shared above by C Shaffer. 

 

With my HSS knives, I'm not planning to start planing my own stock thicknesses of MDF, I'll continue purchasing different thicknesses.  I'm sure it'll make the knives duller, but so does the dirt, knots, and old finishes I also occasionally plane.  Along the same lines of how I make my plywood sled runners, I wouldn't hesitate to do it again if I needed a custom thickness for a tool or jig part.   I'm also pretty confident that planers with carbide inserts will laugh at this stuff.

  • Author

Ladies and Gents, I found the FWW article and can provide some context...

 

  • The writer suggesting planing MDF is Marc Adams.  Right off the bat, there's quite a bit of cred...  This is quite different than a "Methods of Work" tip, or something similar.
 

  • The insert he's describing is for a miter saw, not a table saw.   These are the inserts held in place by countersunk flathead screws, without the adjustments a table saw insert would include.  He mentions planing 1/4" MDF to the necessary thickness, if your saw requires an insert that is slightly thinner than 1/4".
 

All in all, I was surprised how well it worked.  There are also a few interesting tidbits in the Canadian Woodworking link, shared above by C Shaffer. 

 

With my HSS knives, I'm not planning to start planing my own stock thicknesses of MDF, I'll continue purchasing different thicknesses.  I'm sure it'll make the knives duller, but so does the dirt, knots, and old finishes I also occasionally plane.  Along the same lines of how I make my plywood sled runners, I wouldn't hesitate to do it again if I needed a custom thickness for a tool or jig part.   I'm also pretty confident that planers with carbide inserts will laugh at this stuff.

As they say, a test is worth a thousand expert opinions! Thanks Barry!

  • 3 weeks later...

I actually had no problems hand planing some MDF for a zci for my mitre saw. I found the handplane allowed me to dial in to the perfect fit easier than trying to precisely set up a router cut for the correct depth. I'm currently making zci's for my new tablesaw and am using laminate covered mdf.

At the end of the day doing up a few zci's isn't going to ruin my handplane but I will re-sharpen after I'm done. The surface isn't fuzzy with a razor sharp plane iron and there's no issue if you sit the planed side down anyway.

The benefit of MDF is it's cheap compared to high quality ply, and super stable over any length of time.

Sent from my iPhone using Tapatalk

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.