Recommended Posts

Posted

I am considering buying a used 8" jointer used from kijiji (like a Canadian Craigslist). The guy only has 110 available, but the jointer runs on 220.

He said he picked up a wall adaptor to run the machine on 110.

Will this damage the motor? Also, will the machine underperform with this set up during test cuts?

Posted

==> He said he picked up a wall adaptor to run the machine on 110.

 

Up-converters certainly exist, but they are generally low-amperage...  I'm not sure what the power requirement is for the 8" jointer, but I would think it would be at the absolute max capacity for the up-converter...

 

==> Will this damage the motor?

A resounding maybe...  Trending toward yes...  It depends on the power desired by the jointer and the power available from the converter...

 

==> Also, will the machine underperform with this set up during test cuts? 

A resounding maybe...  Trending toward yes...  It depends on the power desired by the jointer and the power available from the converter...

 

A safety note here:  These portable voltage converters designed to support low-power devices only. Their primary purpose is to support ex-pats/travelers/holiday/etc so folks can use their 220 devices on a 110 grid or vice-versa...  I've got one myself and take it on the road when traveling overseas for an extended time with diving gear, photo gear, underwater video rig, etc...  They are NOT designed for stationary woodworking tools...   This is in no-way a good idea...

Posted

If he was only taking light cuts on narrow edges it probably worked, but a wide or heavy cut would not be good for the motor or the adapter! What kind of 8" joiner is it? Any idea how old it is?

Posted

If he was only taking light cuts on narrow edges it probably worked, but a wide or heavy cut would not be good for the motor or the adapter! What kind of 8" joiner is it? Any idea how old it is?

It's a lightly used delta dj20. Looks immaculate from his photos. I'll post some in a little while.

He said he was not using the converter to run the jointer, but to prove to potential buyers that it works. I'll email for some more info.

Posted

==> so I'll just run a new 220 line. 

 

+1

 

 

Although, 1.5HP may be a bit lite for an 8" jointer (since we don't know the service factor for the motor).  Today, HP is treated as a marketing spec (i.e. they mislead the consumer)...  Thirty years ago a 1.5HP motor would have been just fine...  but today, it depends on who's 1.5HP it is (Baldor, Leeson, no-name Chinese, etc) and the service class of the particular motor...

 

I'm not saying don't buy it -- it's just that you may not be able to hog-away at hard maple... 

Posted

Most motors can be wired either 110 or 220. It's a matter of popping the cover and seeing the wiring diagram. Rotation direction and voltage are usually diagramed inside the cover plate. 1 1/2 hp should be just fine at 110 on normal circuits. Much more hp and is go 220.

Steve

Posted

If you know jus' a leetle bit about wiring, running another wire for 220v is simple.

As far as the fact that he's been running it on the wrong voltage, there may have been some strain or damage on the motor.  May not be significant....maybe someone here can address that.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Who's Online   2 Members, 0 Anonymous, 56 Guests (See full list)

  • Forum Statistics

    32.1k
    Total Topics
    437.6k
    Total Posts
  • Member Statistics

    26,009
    Total Members
    3,644
    Most Online
    Joseph b
    Newest Member
    Joseph b
    Joined