Recommended Posts

Posted

Just a question. I don't think I have seen (although I have most likely missed them) any shooting boards in my older reference books. Long grain ones yes but not end grain. Any help on early examples would be appreciated.

Posted

"The Shooting Block is two boards fitted together, the sides of which are lapped upon each other, so as to form a rebate for the purpose of making a short joint, either oblique to the fibres, or in their direction. By this instrument the joints of panels for framing are made, also the joints for mitres of architraves, or the like."

 

Nicholson, that's early enough. Thanks for the link M, my computer is a ball ache with pdf download!

Posted

A guillotine type miter trimmer also does a lot of the same trimming. I keep mine razor sharp and it leaves a glass smooth cut.

Once you exceed the opening capacity a shooting board is a better option. Mine cost less than many good hand planes cost these days.

Posted

A guillotine type miter trimmer also does a lot of the same trimming. I keep mine razor sharp and it leaves a glass smooth cut.

Once you exceed the opening capacity a shooting board is a better option. Mine cost less than many good hand planes cost these days.

I've used one of those for a Long time too.  If I didn't have it now, I'd probably build a shooting board.

Posted

"The Shooting Block is two boards fitted together, the sides of which are lapped upon each other, so as to form a rebate for the purpose of making a short joint, either oblique to the fibres, or in their direction. By this instrument the joints of panels for framing are made, also the joints for mitres of architraves, or the like."

 

 

Interesting that this seems to leave out cross grain shooting to achieve a square end as a reason for a shooting board.

Posted

Potentialy Wilbur, as you alluded to on FB and it's a view I support, it's all about the shoulder lines. It's difficult to think of "Joinery" (production of windows, doors etc) that requires an end grain shooting board. Most of these old books seem to be written about Joinery rather than fine cabinet making. Just a hunch.

Posted

Here’s my end of the discussion Graham and I had on Facebook:

 

My understanding is that in traditional hand tool methods of work, you have a reference face and a reference edge. All marking and measurements come off of those parts of the board, diminishing the need for a perfectly square crosscut.
 
For example, when making a dovetail joint, many folks say that you need a square crosscut end of your board so that you can accurately mark the baseline, with the thought that you would be using a marking gauge for that purpose. Traditional practice would use a square to mark the baseline, referencing off the edge instead.
 
Finally, the need for a clean crosscut was often obviated by burying the endgrain in the final project with applied moldings, breadboard ends, or within the project itself.
 
So that’s why traditional practice didn’t rely on shooting boards. Of course, more modern designs often expose endgrain, so a shooting board might be more useful to make the types of projects that people want to these days.
  • Like 1

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.