Ralph Kolva Posted December 31, 2013 Report Posted December 31, 2013 This piece started out as a small cabinet for my wife's office while also helping me build my portfolio. I wanted a small case that would lend itselft to small production runs while still being fairly unique, the goal was to create an attractive case that I could produce relatively quickly. It is 27" high x 25" wide x 20" deep. Being attracted to Asian furniture and architecture obviously influenced the design as well as Greene and Greene and Charles Limbert. I liked the look of the arched breadboards and it reminded me of a Torii gate to a Shinto shrine, thus calling the night stand Torii. It is constructed of air dried Cherry that I've had for a decade with some Flame Cherry, Leopardwood and Macassar Ebony I purchased at a local lumber supplier here in Denver. Joinery is mostly loose/slip tenon done on the router table (would love to have a hoizontal mortisor or multi router) with pegged joints from behind, the Ebony plugs are decorative. Most of the curved elements are template routed. Developing all the templates took several days and a good bit of Bondo, but once the templates were completed the piece progressed quickly. Drawer is half blind Dovetail front and through Dovetail on the back, all hand cut. Doors are bridle joints and the door stops are Krenov style Ebony stops and bumper on the bottom. The Drawer handle was hand shaped with a spokeshave and the door handles I made a scratch stock to give the sides of the Ebony handles some relief. Drawer runners and kicker are some dense exotic I've had sitting around for 20 years, no idea what it is. So far I've had some good responses from friends but looking forward to hearing what other woodworkers think. Thanks, 1 Quote
TRBaker Posted December 31, 2013 Report Posted December 31, 2013 Hey Ralph. Welcome to the forum. That's really a nice piece and I can see that, if you can mass produce them, there should be quite a market. Well done. Quote
Llama Posted December 31, 2013 Report Posted December 31, 2013 Wow! Stunning piece! Love the wood choices! Quote
chrisphr Posted December 31, 2013 Report Posted December 31, 2013 Very attractive! Love the curves and wood choices for the doors. Quote
Ralph Kolva Posted December 31, 2013 Author Report Posted December 31, 2013 Thanks for the warm welcome and the very nice comments. We need a couple of desks so the small run of the nightstand will have to wait. I'll try to post the desks when they're done. Thanks again for taking the time to look at the pics and post a comment. Have a Happy New Year! Ralph 1 Quote
wooddok Posted January 2, 2014 Report Posted January 2, 2014 Love the flame in that cherry and the Leopardwood inserts are stunning against the cherry! Nice work! Quote
Password is Taco Posted January 3, 2014 Report Posted January 3, 2014 Nice work. My only quip is that i feel that the pull on the drawer should be longer....feels a bit too small to the eye. Otherwise, great job! Quote
Byrdie Posted January 4, 2014 Report Posted January 4, 2014 Great marriage of design and wood choice. Nicely executed. Quote
G S Haydon Posted January 4, 2014 Report Posted January 4, 2014 Ralph, very nice! What a great job, the joinery is super tight, seems quite original concept too, at least to my eyes. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.