mcollins Posted January 24, 2014 Report Posted January 24, 2014 Hey everyone, After lurking around for awhile I finally decided to join in. I have a small shop and build things for friends and family. I only use power tools but I think I would enjoy hand tools. I am wanting to try it out but I don't know where to start. I currently own a small block plane, an old Stanley no. 6, and a 1/2" chisel. I know that I need to get something to sharpen with but I'm lost after that. I am thinking about buying the book The Anarchist's Tool Chest. I was just wanting to get some opinions on what would be some good tools to purchase. Sent from my iPhone using Tapatalk Quote
pghmyn Posted January 24, 2014 Report Posted January 24, 2014 I'm close to being in the same boat. I own a low quality block plane that I found, 4 chisels (3/16", 3/8", 1/2", and 1"), Stanley #4, and a dovetail saw. For now, this set of tools is good enough for me, as I mainly do my work with power tools as well. However, I like the look of a hand cut dovetail as compared to a machine, and the range of chisels I have can cover anything I want to do. I bought two high quality chisels from Lie-Nielsen, and I do not regret that at all. $110 well spent (although one was a gift). I also purchased a nice dovetail saw from Lee Valley for $50 I think it was. Again, I do not regret that. However, my #4 came from eBay for $40. It's a really nice plane for me, since it gives me an opportunity to learn how to use it without worrying about ruining it. I purchased a Norton oil stone sharpening set, as recommended by GS Haydon. http://www.amazon.com/gp/product/B000XK5ZDY/ref=oh_details_o01_s00_i00?ie=UTF8&psc=1 http://www.amazon.com/gp/product/B000I1AVDW/ref=oh_details_o01_s00_i01?ie=UTF8&psc=1 This stone is cheap, and it just plain works. Maybe not the best in the sharpening world, but you can't go wrong with the price. I learned how to properly hone a blade in just minutes and get back to work producing extremely fine shavings for finesse work. Again, this is a cheap sharpening system, but it is invaluable if you have blades that need sharpening. So, if you total up my "all in" amount for hand tools, I'm sitting at about $230 - plus taxes. Start small, ensure that you like using the tools, and then add on from there. First thing I would do in your case is purchase a couple more chisels. They come in handy in so many places. My most grabbed chisel now is the 3/8" that I just recently bought. If that helps Quote
..Kev Posted January 24, 2014 Report Posted January 24, 2014 Welcome to the forums! Another book that may help you out is Marc's book.. http://www.twwstore.com/books/hybrid-woodworking-book/ I look forward to seeing pictures of your work and shop! 1 Quote
Scott Keith Posted January 24, 2014 Report Posted January 24, 2014 I use power tools as well, but reach for my hand planes and chisels much more these day. In my opinion, the biggest factor in becoming effective with hand tools is sharpening. The best LN # 4 is nothing but a paper weight if it isn't sharp. Learning to sharpen is foundational, so I would start there. I am not sure where you live, but local WW stores sometimes have sharpening classes and there is a lot of good info on the web. Don't worry too much about the sharpening media (I started with sand paper on glass) until you are comfortable putting a fine edge on a tool. Quality steel is a lot more fun to sharpen than the cheap/crappy stuff. So for tools, I would start with a good quality low angle block plane, and old Stanley, LN or Veritas, and a few good quality chisels (1/4", 3/8", 1/2"). I would highly recommend spending a bit more on quality vs. quantity at this point. Depending on the part of the country you are in, flea markets, and estate sales are often prime for nice old tools that need a little TLC. The next plane I would recommend is a #4 smoother. Older Stanleys are readily available and are a great place to start. You may want to buy a replacement iron from LV or Hock for a reasonable amount and you'll be in business. I second the LV dovetail saw mentioned above and would also recommend an inexpensive Japanese pull saw (Z saw). 2 Quote
Freddie Posted January 24, 2014 Report Posted January 24, 2014 Alot has already been covered here, so i wont echo the obvious. Just wanted to add if you want to invest slightly more into a dovetail saw, the lie nielsen thin plate tapered dovetail saw is a dream to work with. Its only $125, not a huge expense but it is amazing and extremely attractive. Quote
G S Haydon Posted January 24, 2014 Report Posted January 24, 2014 Hi M, Welcome to the forum. A tough question and I'm going to think form a low investment point of view to wet the taste buds. A decent set of chisels, Narex 8105's are a good value set and work well. A #4 or a variation of will be good. A Carcase saw, nothing too fancy, even a throw away version will be fine Like Sam said an India cobo stone is a good starter for shrpening. If you like using these tools you can go deeper, way deeper. If you don't not too much has been spent and I'm sure you will still find a use for them somewhere. Quote
mcollins Posted January 24, 2014 Author Report Posted January 24, 2014 Thanks for the suggestions. Now how about first hand tool projects? What would y'all suggest building? I was thinking about a saw bench like this one: Sent from my iPhone using Tapatalk 2 Quote
..Kev Posted January 25, 2014 Report Posted January 25, 2014 If that's what you want to build go for it! Cool thing about this hobby, you get to build what you want to build! Quote
sdesocio Posted January 25, 2014 Report Posted January 25, 2014 Id seriously recommend - The New Traditional woodworker. -- I wish I had read this before I setup my shop. http://www.amazon.com/dp/1440304289/ref=wl_it_dp_o_pC_nS_ttl?_encoding=UTF8&colid=2IBCJMKVFG4X7&coliid=I3CHEWTGMISC2S Quote
sdesocio Posted January 25, 2014 Report Posted January 25, 2014 http://www.wkfinetools.com/contrib/cschwarz/z_art/sawBench/sawBench-01.asp Quote
pghmyn Posted January 25, 2014 Report Posted January 25, 2014 If that's what you want to build go for it! Cool thing about this hobby, you get to build what you want to build! I will second that! I wanted a desk to do my homework on, and now I have a desk! Spent $100 and couldn't be happier. Quote
mcollins Posted January 25, 2014 Author Report Posted January 25, 2014 Thanks for the links sdesocio. That book looks like it will be a lot of help. Sent from my iPhone using Tapatalk Quote
rwhite Posted February 1, 2014 Report Posted February 1, 2014 I am in a similar position and have been doing some reading on hand tools. I came accross this article which may help some. http://www.wagnermeters.com/wood-moisture-meter/top-40-woodworking-tools/ Quote
Llama Posted February 1, 2014 Report Posted February 1, 2014 I am in a similar position and have been doing some reading on hand tools. I came accross this article which may help some. http://www.wagnermeters.com/wood-moisture-meter/top-40-woodworking-tools/ This list is pretty flawed. If you are going all hand tool use, get this book. Read it before you buy anything else. http://lostartpress.com/collections/books/products/the-essential-woodworker If you want prettier pictures, and you want to incorporate power tools into your arsenal, then get Marcs book too. http://www.shopwoodworking.com/hybrid-woodworking-group?cid=5&CAPCID=29578318452&cadevice=c&gclid=CJf8pYjgq7wCFdHm7AodDhMA1w&CA_6C15C=400007710000031893 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.