Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

No idea how to finish

Featured Replies

Hey guys I will be finishing up a jewelry box for my wife tomorrow and I really didn't think ahead on this. I made it out of red oak and purpleheart scraps. Main part of box is oak Middle strip of ph on lid and some trim in ph. I have never used purpleheart on anything but a cutting board. Any suggestions appreciated.

Jewelry boxes don't take a lot of abuse. I would probably use a shellac. I assume it's your first piece finishing? Shellac is pretty forgiving all things being considered.

  • Author

I've only done simple finishes up to this point. Mainly min wax stains on some shelves and tables

Sent from my iPhone using Tapatalk

Shellac is good and dries fast. I like to saturate a rag in denatured alcohol, dip the rolled-up rag in shellac, and rub it in like polishing a boot. No runs, no drips, no errors. Wait until it is dry to touch ( maybe 1/2 hour) and repeat the process until you get the look you want.

Rattle can= aerosol (or whatever they are packing those cans with these days.) Shake til they rattle for a minute then spray away. I would buy an extra can for practice. I do not find rattle cans to be a natural use item unless you grew up a graffiti artist. :-)

  • Author

Thanks guys I'm gonna head to lowes and see what they have before the snow starts again

Sent from my iPhone using Tapatalk

I agree with the spray lacquer for small projects.  Deft makes a good one that's available at the box stores.  The key to a good spray finish is to start the spray off of the part, sweep across the part in one direction, and release the spray off the part. Do this on every stroke.  you kinda get into a rhythm --- press, sweep, release - press, sweep, release................  

Shellac is good and dries fast. I like to saturate a rag in denatured alcohol, dip the rolled-up rag in shellac, and rub it in like polishing a boot. No runs, no drips, no errors. Wait until it is dry to touch ( maybe 1/2 hour) and repeat the process until you get the look you want.

 

I love shellac as a finish, probably my favorite, but I've never tried this method.  I'll give it a shot next time.  Do you thin your shellac at all before dipping?

  • Author

Finished the box sprayed part yesterday looks great. Went to spray lid a few minutes ago. After one coat I have white all over it. Looks like someone put a wet paper towel on it and pulled it off. What to do now??

Sent from my iPhone using Tapatalk

  • Author

It might've been the cold or dampness the day I sprayed first. But I let it sit a day wiped and cleaned real good and sprayed two more coats and it looks great. I'll put a pic up here to see

Sent from my iPhone using Tapatalk

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.