Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

What's your "go to" finish for hvlp?

Featured Replies

I don't have an HVLP setup yet, but would like to start researching them a bit. I'm curious what the most common finishes are to spray through these units. Right now, I tend to use a lot of wiping varnishes (thinned poly), lacquers, or the BLO/poly/mineral spirits trinity. What do u guys spray on your pieces most commonly?

I use an HVLP Accuspray gun to spray stains and a Croix HVLp gun to spray water bourne finishes. Both are turbine powered. I have an American Turbine 1000 . You can spray shellac , lacquer and even auto paints with one of these.

Current go to:

Shellac (made from flakes, #.5ct to #1.5ct)

NS Lacquer (typically Deft), Pre-cat (typically 336 or 339) and Cat Lacquer (Gemini)

 

Note: WB Poly (GF) - will replace the solvent lacquers over time...

I spray general finishes high performance poly. It's an exceptionally good finish

General Finishes has good products but I like Old Masters water based poly as it's cheaper and I can get it locally.

I was going to try Old Masters because I have been hearing about them. 

 

I called our local paint store, as they were a listed dealer for Old Masters. I asked for the 2 types of water-based topcoats that was advertised. Paint store said they don't have water-based in stock and would have to order it. I was told I had to order $1500.00 of product. He told me that is what Old Masters charges him on minimum order and didn't want the remainder of product sitting on the shelf. 

 

So I contacted Old Masters office directly and asked if they had any samples sizes and explained about the local paint guy and the $1500.00 mini order. Old Masters told me I could get some product from them. The problem now is the weather, it's so cold, their product is sensitive to the cold and would have to watch the weather to ship. Well needless to say my emails fell on deaf ears and that was over maybe 2 months ago. Their customer service was less than desirable. 

 

-Ace-

 

So I contacted Old Masters office directly and asked if they had any samples sizes and explained about the local paint guy and the $1500.00 mini order. Old Masters told me I could get some product from them. The problem now is the weather, it's so cold, their product is sensitive to the cold and would have to watch the weather to ship. Well needless to say my emails fell on deaf ears and that was over maybe 2 months ago. Their customer service was less than desirable. 

 

-Ace-

 

The 2 times I've called they've been very helpful. One downside to water-based finishes is shipping in the winter. That is another reason I like being able to get Old Masters locally. 

 

I did some stain tests with GF Enduro-var, GF High Performance, and Old Masters Poly:

 

Well needless to say my emails fell on deaf ears and that was over maybe 2 months ago. Their customer service was less than desirable. 

 

-Ace-

 

I dont know that I would write it of as bad service if an email doesn't get answered. My first assumption is that it went into a spam folder and I should pick up the telephone and contact them old school.

I dont know that I would write it of as bad service if an email doesn't get answered. My first assumption is that it went into a spam folder and I should pick up the telephone and contact them old school.

 

You don't understand.

 

I communicated with 2 different sales reps. One handed me off to the other due to "not their territory" I have had various email conversation with my sales contact during that time.  Anyhow, what difference does it make, phones go unanswered so do emails. It's called a hint....."your not worth my time." I shouldn't have to chew at their ankles.

 

And if I have to chew on someones ankles, what does that have to say about the company? This squeaky wheel didn't get any oil. Enough said.

 

-Ace-

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,012 Total Members
  • 3,644 Most Online
  • JAR Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.