Freddie Posted February 26, 2014 Author Report Posted February 26, 2014 Sam, are you referring to the last table build? Yes it was amazing! Quote
Freddie Posted February 26, 2014 Author Report Posted February 26, 2014 Nevermind just watched the new video. I saw it in one of their recent videos as well, how badass is that thing! Quote
pghmyn Posted February 26, 2014 Report Posted February 26, 2014 Nevermind just watched the new video. I saw it in one of their recent videos as well, how badass is that thing! How much do you think that shelix head cost? I didn't see that brand or model on the byrd site, so a custom fit must have cost a pretty penny. Quote
Freddie Posted February 26, 2014 Author Report Posted February 26, 2014 Im sure it cost a couple of my machines. Quote
Freddie Posted February 27, 2014 Author Report Posted February 27, 2014 I ordered some premium bits from lee valley tonight(1/4" and 3/8"). I also grabbed the cone sharpener set along with the ezee lap stick files. Quote
Freddie Posted February 28, 2014 Author Report Posted February 28, 2014 http://www.essentialhardware.com/product_detail.php?pid=139386&gclid=CMet3Yz87rwCFZLm7AodtAEA4Q Would this work for spraying the bits? I can buy this around the corner from my house instead of ordering online. Quote
G S Haydon Posted February 28, 2014 Report Posted February 28, 2014 Graham, i just recieved a message back from matt wolfe and he recommended the japan bits as well. He said from rockler and from lee valley. The lee valley premium bits are well priced. Slam dunk, great minds an' all . Just watched the vid, we run a version of shelix in our four sided planer, they are spiral heads with shearing cuts with 30mm tungsten turnover knives. They work great but you know, I hate them. Imagine how long it takes to turn the cutters, clean them and when you spin it up and one of the devils leaves a stripe! I'm sure the wood those guys are using demands the quality but I much prefer TERSA, nice and quick. I just ordered 200 cutters 30mm tungsten blades setting me back £350.00! I now also fell bad, those boys have an extra 4" on me......... Quote
Freddie Posted March 1, 2014 Author Report Posted March 1, 2014 http://www.essentialhardware.com/product_detail.php?pid=139386&gclid=CMet3Yz87rwCFZLm7AodtAEA4Q Would this work for spraying the bits? I can buy this around the corner from my house instead of ordering online. Anyone on this link I posted earlier? Will this stuff be a good dry lubricant to use on the mortising bits instead of ordering something online? Quote
G S Haydon Posted March 1, 2014 Report Posted March 1, 2014 Honestly Freddie, save your money. I have never needed to lube an HCM, try it without. Quote
Eric. Posted March 1, 2014 Report Posted March 1, 2014 Just watched the vid, we run a version of shelix in our four sided planer, they are spiral heads with shearing cuts with 30mm tungsten turnover knives. You suck! 1 Quote
Freddie Posted March 1, 2014 Author Report Posted March 1, 2014 Thanks Graham, I'm just trying to approach this and make sure I miss no steps. Quote
Guest Posted March 1, 2014 Report Posted March 1, 2014 lube. that is funny. lube. say it. lube. looob. looooooob. loooooooooooob. Quote
Tom King Posted March 1, 2014 Report Posted March 1, 2014 If it squeaks with just the bit turning in the chisel, I give it a shot of 3.36 in one of the side holes of the chisel onto the bit. otherwise, nothing else. Quote
Freddie Posted March 1, 2014 Author Report Posted March 1, 2014 If it squeaks with just the bit turning in the chisel, I give it a shot of 3.36 in one of the side holes of the chisel onto the bit. otherwise, nothing else. Tom, are you referring to the crc 3-36? If so I'm in luck, got a can. Quote
Tom King Posted March 1, 2014 Report Posted March 1, 2014 Yes. One of the reasons it was rated highest in the FWW test was that it had no effect on any wood finish adhering properly. It works like a charm for this purpose, and lasts a long time before needing it again. I keep a straw in one sitting out in the wood shop all the time. Quote
Freddie Posted March 1, 2014 Author Report Posted March 1, 2014 Yes. One of the reasons it was rated highest in the FWW test was that it had no effect on any wood finish adhering properly. It works like a charm for this purpose, and lasts a long time before needing it again. I keep a straw in one sitting out in the wood shop all the time. Yes, I read that article when it came out, and ordered myself a can that evening. I havent seen rust on my machines since. 'nuff said Quote
Byrdie Posted March 14, 2014 Report Posted March 14, 2014 Lube and a fresh wax job. Now there's a combo ... for your HCM chisels. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.