Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Need padauk!

Featured Replies

Hi, I have an upcoming commission and I need a piece of padauk. Dimensions: 8/4 or larger 12" wide or close 20" long or close If you have something like this, pm me. Thanks!

  • Replies 51
  • Views 9.6k
  • Created
  • Last Reply

Top Posters In This Topic

Most Popular Posts

  • I could glue it up, but I wanted to exhaust all reasonable avenues first. It's for a custom animal I am making for a client. It's a big deal, and I want it to be perfect. It will be seen by a lot of p

  • My yard carries 8/4 that wide, but it would be a 12' section. What am I gonna do with 10' of padauk? 

Posted Images

Unfortunately I only have access to 4/4 at the moment, but I believe some of the boards are 12"+.  Did you check Bell Forest or Shannon's yard?...Finkelstein Shmiggelhammer or whatever?  I have a feeling it'll be tough to find stock larger than 8/4 but I guess it's out there somewhere.  Let me know if the 4/4 will help you and I'll get you a price.

  • Author

Eric, I have a call out to a few places, but haven't heard back yet. Sam, they do but not 12" wide. Unless I want a $500 slab...

Eric, I have a call out to a few places, but haven't heard back yet. Sam, they do but not 12" wide. Unless I want a $500 slab...

You're saying you don't want that slab?

 

Kidding. I would try Bell forrest. I always look through their site when at work. Most exotics are on par with KM or even cheaper. Not sure about shipping, though.

I have a chunk of clear straight grained 8/4 x 8" x 24" sitting around.

If that's wide enough I can send you a pic.

  • Author

I'd like a pic, and a price :)

Perhaps I can modify my design a bit...

It would be whatever I paid for it plus shipping to the frozen tundra.

I think it was around $12/BF but I will dig up the invoice

post-13757-0-27492500-1394754027_thumb.j

If all else fails call Richard at Carlton's Rare Woods. 404-876-1144 He has sources all over the world. If he doesn't have it he might be able to find it.

Couldn't you glue up 2 or 3 pieces to get the width ?

  • Author

I could glue it up, but I wanted to exhaust all reasonable avenues first. It's for a custom animal I am making for a client. It's a big deal, and I want it to be perfect. It will be seen by a lot of people, so I am feeling the pressure of getting this right :)

A piece that wide might cup on you or move after you cut out the animal. But I understand the desire to build out of one piece. Plus most places aren't going to cut 2 ft off of a big wide plank so you could be forced to buy a 8' to 15' long plank.

If you bought a 5" wide plank and dressed the edges nicely you might have a few feet left over but not a huge plank eating up any profit.

Laminate two 4/4 pieces together with the rings in opposite directions. Would that help with cupping?

My yard carries 8/4 that wide, but it would be a 12' section. What am I gonna do with 10' of padauk?  B)

==>What am I gonna do with 10' of padauk?   B)

Mel should get the entire stick; build his cow; use the remaining 10' for an entire herd of Reindeer for coming xMas season...

==>What am I gonna do with 10' of padauk?   B)

Mel should get the entire stick; build his cow; use the remaining 10' for an entire herd of Reindeer for coming xMas season...

Of course trip, if he so willingly pays for it.  :P

  • Author

You guys are both hilarious and awesome!

Reindeer... Yes, that would be great! Unfortunately padauk is my slowest moving reindeer, and the cost of such a large piece would mean my reindeer customers wouldn't be too happy :) unless someone, hint hint, wants a ten foot giraffe ;)

The local mill has a very nice slab that's $500. Seems when that "live edge" title is applied to a piece, the price goes up!

Also would be awesome if someone had a piece the same size in spalted maple. I quoted maple, but I think splalted maple would look awesome for this particular animal.

  • Author

Use maple and dye it red/orange.

 

I can't do that. :)

 

I may have found a piece that is the perfect size from Bell Forest, I still need to call them and verify but it sounds like they have what I need. And the 10% guild discount gives it a free ride to my house! :)

  • Author

They had a 9 foot board, and were able to chop off 2 feet for me.

 

Thanks to everyone for the help, and suggestions!

  • Author

Wow, that is great customer service !

 

Indeed! My local guys wouldn't do that for me. Can't blame them, but it certainly goes a long way to get that kind of service! And the cost is very reasonable. Especially considering I don't have to go anywhere to get it! :)

Indeed! My local guys wouldn't do that for me. Can't blame them, but it certainly goes a long way to get that kind of service! And the cost is very reasonable. Especially considering I don't have to go anywhere to get it! :)

What was the shipping quoted to (before discount)?
  • Author

Shipping is $17.37 I think just the wood is discounted not shipping

Costs me about $8-$10 in gas to go to KM. That's not too bad for shipping.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.