nod Posted March 17, 2014 Report Posted March 17, 2014 I'm seeing (what i think) decent deals o 6" jointers (PM 54A $550, grizzly $375, jet $400). I know most of u guys suggest holding out for an 8", there aren't many used versions popping up tho (that I'm a total newb). Of course, I'd love this 12" but t's not really in the cards. what makes or breaks a 6"? Quote
tim0625 Posted March 17, 2014 Report Posted March 17, 2014 Yeah, we'd all love that 12.....joint a board or stretch out for the back to feel better. I kind of op for the air craft carrier name for it though....even has a steering wheel. Quote
minorhero Posted March 17, 2014 Report Posted March 17, 2014 There are a couple of different versions of jointers out there. You have the wedge based jointers (look like anvils) and you have co-planer tables (sit on 4 bolts that are adjustable). Some people prefer one over another. If you can't hold out for an 8" and/or simply don't feel the need to do so (and I sure didn't when I started) then go look at some machines and see what you like. Personally any of them will do a fine job assuming they were well cared for. But expect to have to do maintenance on anything over then about 15 years old and all of them will likely need to be calibrated and knives sharpened etc. If one happens to have a spiral head then go with that one as they are a nicer option. Quote
prov163 Posted March 17, 2014 Report Posted March 17, 2014 If you can find a jointer with parallelogram tables it's much easier to get the infeed/outfeed coplaner. I was lucky enough to find a used Delta DJ-20 in excellent condition. I was realigning the tables last week and it was much easier than I expected. I agree with Apple Wood on the segmented cutter head. Got one on my planer and love it. Hope to get one for my jointer this year! Quote
Guest Posted March 17, 2014 Report Posted March 17, 2014 If all else equal get the one with longer infeed/outfeed tables. I have the PM 54A and like it.... although I will probably trade up in the next few years. Not due to size, I can get by with the 6" width, but power. I find it a bit underpowered for face jointing harder woods like maple. For edge jointing it is great. Quote
nod Posted March 18, 2014 Author Report Posted March 18, 2014 As always, a pleasure hearing from those in the know. Grey, there happens to be a DJ-20 for sale near me, but it's 1K. too much for me at this point in the hobby. even a grizzly 8x75 at $900 is juuust a bit outside. i'll either be waiting, or saving. well, both really. Quote
prov163 Posted March 18, 2014 Report Posted March 18, 2014 Nod, make an offer on the DJ-20. Most they can say is no. Guy was asking $1200 for the one I bought. I offered him considerably less. We negotiated and I got a great deal and he got some cash he really needed. Just a thought. Don't let any if this keep you from buying a 6" jointer though. As you develop skills and grow in your abilities and goals, you can always trade up if you want to. Sent from my iPad using Tapatalk Quote
bobcrosley Posted March 19, 2014 Report Posted March 19, 2014 As others have said, longer beds are better, and parallelogram tables are better than dovetailed ways. Marc has some videos on how you can joint wider boards on your smaller jointer for those times you need more than 6". The approach I took was to spend a lot of time waiting for the best deal on a decent 6" jointer. Took a couple months, but I got an older 6" JET in great shape for $150 on Craigslist. Dovetailed ways for the tables, and it took a bit to get it all adjusted, but now it's completely dialed in. I rent, and don't have 220v in my garage, so I couldn't do most 8" jointers. So I figured to get a good price on a good jointer, and when I'm ready to upgrade, I should have no problem selling this JET for what I paid for it. Or, if you're certifiably insane, like Matthias Wandel, you can build your own 12" jointer out of an old planer. http://woodgears.ca/jointer/homemade.html Quote
wtnhighlander Posted March 19, 2014 Report Posted March 19, 2014 Hey, Matthias is crazy like a fox! Quote
nod Posted March 21, 2014 Author Report Posted March 21, 2014 Hey, Matthias is crazy like a fox! crazy is a great word for that guy and his work. the site shows another guy built his own from the plans too and it looks pretty sweet. with 20 hours to build it, even tho he only spent $50, it's not exactly "cheap" (add in cost of delta planer). I'm sure the project itself was half the fun. But if you look at a decent hourly rate, and the time involved... I guess he'd be at the cost of a decent 8"... Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.