RJsumthn Posted April 27, 2014 Report Posted April 27, 2014 Why doesn't anybody make a 1.75hp 8in 110/220v jointer? There are plenty of the 2hp models but they need 220v. Delta makes a 1.5hp 8in 110/220v jointer but it's pricey because they know no one else competes with it. I'm sure that a lot of hobbyist would like to get the 8in capacity without having to rewire their shop. Quote
Guest Posted April 27, 2014 Report Posted April 27, 2014 because 1.75 hp is not enough power to face joint an 8" board. Quote
RJsumthn Posted April 27, 2014 Author Report Posted April 27, 2014 Most 6in jointers only have 1hp. An 8in board is 33% larger so why wouldn't you just need 33% more power which is 1.33hp. Most 8in jointers are only 2hp so we are not talking about a big difference. Another point is that we very rarely, if ever, make a pass at the maximum cut depth which requires the most power. Plus, our lunch box planers can cut up to 13in on 110v but we can't joint 8in? The numbers in my head say it is possible and that it could be a well received product in the market. Quote
knotscott Posted April 27, 2014 Report Posted April 27, 2014 Several brands used to offer a 1.5hp 8" jointer, but most have upped it to 2-3hp. I've honestly never noticed my 6" 1hp motor lugging one bit, so I can't imagine that 1.5hp or 1.75hp on an 8" would be under powered. You might be able to find a used Grizzly or Sunhill 8", 1.5hp machine. Quote
Nestor Posted April 27, 2014 Report Posted April 27, 2014 Look up Woodtek. Bridgewood, and Yorkcraft. They also sell 1.5 hp models. Sent from my iPad using Tapatalk Quote
rodger. Posted April 27, 2014 Report Posted April 27, 2014 I almost bought the 8" delta, but I didn't. I currently have the 6" model, but am gonna spring for a powermatic 8" someday. For now, my 6" delta does a great job. Quote
STL Woodguy Posted April 28, 2014 Report Posted April 28, 2014 My used Powermatic 60 jointer does 8" with both 220 and 110v, though mine is still wired for 220 via a laundry outlet. Quote
mikem Posted April 28, 2014 Report Posted April 28, 2014 Its not as much the width of cut as it is your depth of cut that is the factor. I have a Dewalt DW734 planer, and as long as I take light passes will face plane a 12" board with no problem. I agree, I wish there were more options for 8" Jointers with a 1.5hp 110V motor being available. The limitation really is depth of cut, and I am perfectly fine with taking more passes to flatten a board. I ended up buying a new 6" jointer as used jointers are not real common in my area. Since these are built for the pro shop more so than the hobbyist, time is money, and less passes means the board is ready more quickly. Quote
Guest Posted April 28, 2014 Report Posted April 28, 2014 Maybe Laguna will do something in this space, just like they have with the new bandsaw everyone is going ga ga over. I think the challenge is woodworking equipment is a niche market to begin with, hobby level equipment is by definition a niche of a niche. It seems the major machine manufacturers have decided that 6" is hobby level and 8"+ semi-pro plus level, and as such have outfitted it with a bigger 220 motor. Quote
CessnaPilotBarry Posted April 28, 2014 Report Posted April 28, 2014 Sometimes, depth of cut is not about taking more or less time... A deep cut can be more accurate. Deeper early cuts can create a flatter surface in a single pass, as you can make a large enough reference surface on the out feed table in one pass. Light cuts can make it easier to create a smoothed surface, flat edge to edge, that still curves end to end, the board doesn't get enough flattened area onto the reference. A deep cut can also allow a board that is convex end to end to be more easily faced, as you can create a cut that starts light, gets heavy, and gets light again, but touches the entire length. 1 Quote
mds2 Posted April 28, 2014 Report Posted April 28, 2014 Woodtek is the only one I can think of. I'm kicking myself for not buying one used here recently. $1300 new, the guy was asking $350 and I passed. Quote
RJsumthn Posted April 29, 2014 Author Report Posted April 29, 2014 This is the first time hearing about WoodTek. Is there a reason for that? Is it as good of a machine as the other big brands? Quote
T-astragal Posted April 29, 2014 Report Posted April 29, 2014 If you could just spring for an additional 220v circuit you would be well served. One day you may do what I used to do, switch out between machines into the same outlet. 110 is so limited at household amperage. Besides when is the last time you said, "I really regret having more power than I need!"Steve 1 Quote
knotscott Posted April 29, 2014 Report Posted April 29, 2014 This is the first time hearing about WoodTek. Is there a reason for that? Is it as good of a machine as the other big brands? Woodtek is essentially the house brand of Woodworker's Supply. In this case, AFAIK, the Woodtek jointer rolled from the same Geetech factory as Grizzly, Sunhill, Bridgewood, former Jet, former GI, King, Craftex, and others. Quote
Rick LoDico Posted April 30, 2014 Report Posted April 30, 2014 Delta makes one. Or used to anyway. I don't know if this is still available. http://toolreviews.woodmagazine.com/power-tool-reviews/jointers-planers/jointers/894-delta-37-365x-8-jointer Quote
atlinwi202 Posted May 6, 2014 Report Posted May 6, 2014 1.75hp is not a standard induction motor rating. 1.5 and 2 are standard ratings. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.