UglySteve Posted May 8, 2014 Report Posted May 8, 2014 Does anybody make it better drillpress than the powermatic one? The features it has that I like are the 6 inch throw, the easy speed adjustment, and the laser alignment. Quote
wdwerker Posted May 9, 2014 Report Posted May 9, 2014 You might take a look at Jets offerings. They own Powermatic. Quote
Trip Posted May 9, 2014 Report Posted May 9, 2014 ==>better drillpress than the powermatic one? depends on what you mean by 'better'... The PM2800B is about the 'best' woodworking-oriented small-shop non-production drill press. I've got one and with some reservations, I'd recommend it... However, once you get into metalworking, you're in a different ballpark -- the tolerances, power requirements, etc are entirely different -- here's a link to a metalworking drill press: http://www.ellissaw.com/Drill-Presses/43/drill-press-9400 ... As you can see, a very different animal... Quote
UglySteve Posted May 9, 2014 Author Report Posted May 9, 2014 Thanks. That's what I was thinking too. I guess this is the press for me. Quote
Tom King Posted May 10, 2014 Report Posted May 10, 2014 Ellis. It's a beast http://www.ellissaw.com/Drill-Presses/43/drill-press-9400 But I'm not giving up my old 1150 for woodworking. I've never had one with laser aligners, but didn't like the laser line on a miter saw (too wide) so I don't feel like I'm missing anything. Quote
Trip Posted May 10, 2014 Report Posted May 10, 2014 ==>I've never had one with laser aligners, but didn't like the laser line on a miter saw (too wide) I'm with you on the SCMS -- don't use the lasers on my Kapex -- to wide... On the PM2800B, the lasers are much finer, so more useful... But still a bit too wide... Quote
jHop Posted May 14, 2014 Report Posted May 14, 2014 I have a Jet benchtop version, and I turn off the laser most of the time. Not just because it's slightly off, but because it actually gets in the way of me seeing what I'm doing. And once the drill is in the middle of the hole, it's useless. Still, I use mine for wood. I use my grandfather's old lathe for metal drilling. (External motor and belt driven, and a jacob's chuck for a metal bit.) Since I don't drill holes in more than strips of bar stock, I'm fine for now. (Plus, the metal shavings and stringers fall out of the way, rather than spiral around the bit and nip my fingers.) Quote
Dan S Posted May 14, 2014 Report Posted May 14, 2014 I have the Jet 17" and i would highly recommend it.http://www.jettools.com/us/en/p/17-deluxe-drill-press/354173 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.