Shane Jimerfield Posted May 10, 2014 Report Posted May 10, 2014 I built one of those curvy cutting boards by Scott Lewis in Fine Woodworking #233 , pp. 68-73 April 4, 2013. Turned out pretty well. I donated it to my kid's school fundraiser auction. They got $200 for it. Nice! I never thought a cutting board would sell for $200, but stranger things have happened at fundraisers. It is 12 x 16 x 1, Maple and walnut. Check out the chatoyant luster. Quote
..Kev Posted May 10, 2014 Report Posted May 10, 2014 I really like that Shane! I'm going to have to look that one up and give it a try! Quote
wouldwurker Posted May 12, 2014 Report Posted May 12, 2014 Love it! I've been meaning to try this ever since I saw that very well shot video! Quote
baok Posted May 13, 2014 Report Posted May 13, 2014 Looks cool. Bonus points for working in the word 'chatoyance'. Sent from my iPhone using Tapatalk Quote
woodieboy Posted May 14, 2014 Report Posted May 14, 2014 Maple and walnut are nice to work wtih. I like the simple design. Keep them coming. Quote
wouldwurker Posted May 14, 2014 Report Posted May 14, 2014 Shane. Isn't Walnut open pored? Will that introduce a bacterial element? Quote
Coop Posted May 14, 2014 Report Posted May 14, 2014 If it's like the one I made, it'll never see a knife Quote
Shane Jimerfield Posted May 14, 2014 Author Report Posted May 14, 2014 Shane. Isn't Walnut open pored? Will that introduce a bacterial element? Most people wash cutting boards, if they use them. Soap is antibacterial. Quote
Beechwood Chip Posted May 14, 2014 Report Posted May 14, 2014 Also, wood itself is anti-bacterial. I've seen studies that found more bacteria on plastic cutting boards than wooden, open pored or end-grain cutting boards. The tiny grooves left by cutting were much more of an issue than the pores or grain of the wood. Quote
Shane Jimerfield Posted May 14, 2014 Author Report Posted May 14, 2014 Mike I've been thinking the same thing. There are many applications for the design...boxes, door panels, drawer fronts...Sent from my KFTHWI using Tapatalk HD Quote
wouldwurker Posted May 14, 2014 Report Posted May 14, 2014 Nice! I stand corrected on the open pore comment. Quote
Eric. Posted May 14, 2014 Report Posted May 14, 2014 I still prefer to play it safe when I build cutting boards and I always use closed-pored, tight-grained species. Yeah, you probably won't get infected and really sick, but with a number of tight-grained options available, I see no reason to take chances. I also advise anyone to whom I gift a cutting board not to use it to cut meats of any kind, and I practice that advice at home, too. I consider walnut to be a semi-open-pored species and probably okay for a cutting board. I would stay away from really open-pored species like red oak, wenge, mahogany, etc (even though a mahogany and wenge board would look pretty wicked now that I think about it). I usually stick with hard maple, cherry, purpleheart, bubinga and some of the other very dense, tight-grained exotics. I made a cherry and bubinga board once that turned out awesome looking. My mom left it in a pool of spilled water and it cracked into a million pieces. Well done, Mom, ya bonehead. 1 Quote
wouldwurker Posted May 14, 2014 Report Posted May 14, 2014 Not to hijack the thread here, but have you seen the guy that build 80's Atari and Nintendo themed cutting boards? http://www.1337motif.com/ Quote
Coop Posted May 15, 2014 Report Posted May 15, 2014 Tiods & Others. When you make the template to cut for the laminated strips, be sure to go with gradual curves. On my first try, one end of my mdf template had too much radius and when I glued the pieces together and clamped it,it put a strain on the strip and cracked it. It still looked pretty neat but with the small crack, I was concerned about juices and crap getting down into it, so I made that one into a serving tray. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.