Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Wavy Cutting Board

Featured Replies

Don't recall who posted this recently here but, I really liked the idea..  Thought I'd give it a go..

 

Simple walnut cutting boards all milled and glued up.  Will put in the maple and purple heart this weekend..  

 

2c71.jpg

 

 

Tiods, The first one of these I made, when I glued in the first strip, I was careful making sure the surface of the two halves was flat but was not too concerned about the length being exactly right as I figured I could always trim the whole thing to length when I was through. So, I was about a 1/16' off. But when I cut the board in two the second time and glued in the second strip, it made the first strip be off by a 1/16". I'm not sure if I said that to where it was clear, cause now I'm confused, but it is important that the ends of the cutting board be even when you glue them up. 

There is an article in FWW by Scott Lewis http://www.finewoodworking.com/woodworking-plans/article/a-unique-cutting-board.aspx

And he also did a video http://www.finewoodworking.com/how-to/video/the-coolest-cutting-board-ever.aspx

Also, be sure and keep the radius of your curves gradual. Good luck to ya. Look forward to seeing the finished product.

  • Author

Every time I see pictures of your shop I get supremely jealous!

 

Looking forward to see the end result. 

 

Thanks Mike, I'm sure there's nothing there you don't have..  I've seen some pretty awesome stuff come from your shop as well!

  • Author

Tiods, The first one of these I made, when I glued in the first strip, I was careful making sure the surface of the two halves was flat but was not too concerned about the length being exactly right as I figured I could always trim the whole thing to length when I was through. So, I was about a 1/16' off. But when I cut the board in two the second time and glued in the second strip, it made the first strip be off by a 1/16". I'm not sure if I said that to where it was clear, cause now I'm confused, but it is important that the ends of the cutting board be even when you glue them up. 

There is an article in FWW by Scott Lewis http://www.finewoodworking.com/woodworking-plans/article/a-unique-cutting-board.aspx

And he also did a video http://www.finewoodworking.com/how-to/video/the-coolest-cutting-board-ever.aspx

Also, be sure and keep the radius of your curves gradual. Good luck to ya. Look forward to seeing the finished product.

 

Thanks for the heads up!  These are a bit over sized in all directions so, I have some trim room.  I also cut the inlay pieces extra long for the same reason.

 

Thanks for the articles as well!

  • Author

I found the cauls to be critically important to keeping it flat.

Can't wait to see how it comes out.

 

A few dominos work well too  ;)

Looking forward to seeing this come to life. I seriously might have to make a trip north and check out your shop.

  • Author

Looking forward to seeing this come to life. I seriously might have to make a trip north and check out your shop.

 

You're welcome anytime James..

  • Author

Got the glue ups done today.. Had a couple other projects working at the same time... :P There are 2 purple heart strips and a maple in the middle.  Will look better when the glue dries and everything is trimmed..

 

1b4e.jpg

  • Author

Not ready to come completely out of clamps yet but, here's a peek..

 

tm9x7.jpg

Looks great so far Kevin! Did you cut the curves for the walnut on the bandsaw and then run flush them up on the router table?

  • Author

Looks great so far Kevin! Did you cut the curves for the walnut on the bandsaw and then run flush them up on the router table?

 

Yes.  I made a template, cut it on the band saw, sanded and made sure the 2 halves fit properly together, then used those to cut and flush trim the cutting board.  Very happy with the results so far!

 

The temperatures were pretty warm here today so, I was pushing the limits on glue set time.  Not sure I'd of got too many more layers in without switching to something slower.

  • Author

Hot the end of May in Custer, WA  - hard to imagine.   Grew up in Bellevue and Kent.

 

Lol, made 75 yesterday..  Since you've lived here, you know that's hot for this time of year..

  • Author

All finished up..  Salad Bowl finish

 

ao21.jpg

 

3mtv.jpg

 

4s6xw.jpg

 

Anyone want to buy a test cutting board?  ;)

SWEET!! Now, every time the Mrs. comes close to it with a knife, you're gonna give her that look of "are you really"

  • Author

SWEET!! Now, every time the Mrs. comes close to it with a knife, you're gonna give her that look of "are you really"

 

Nah..  She can go for it..  It's not end grain so it'll pop right back in the planer..  It's also not hard to do so, if I need to build another, it doesn't take that long..

  • Author

Well, it saw the knife tonight at dinner, it's been christened!

  • Author

Beautiful cutting board, no longer a virgin !

 

Thanks Steve, no longer a need to horde those thin strips  ;)

  • 2 weeks later...
  • Author

Decided to make one out of 8/4 Walnut, Maple, and Sapele scraps I had in the shop.  Definitely takes more to suck this one together!

 

qel7.jpg

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

  • There are no registered users currently online

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.