Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Best wood for large table

Featured Replies

I am in the early planning stages for a large dining room table. Would like advice on what types of wood people have used for tables like this. Thanks.

Pretty much any hard wood will do.  Ultimately, it depends on what you want it to look like finished and your budget.

  • Author

Thanks very much. So when you say hard woods you mean things like walnut, oak, mahogany etc all of which are pretty pricey. This will be a smooth finished table, stained and have some type of poly like protectant on it. What wood would you choose? Won't hold you to it just curious.

Thanks very much. So when you say hard woods you mean things like walnut, oak, mahogany etc all of which are pretty pricey. This will be a smooth finished table, stained and have some type of poly like protectant on it. What wood would you choose? Won't hold you to it just curious.

 

Again, would depend on the look I wanted and my budget.

 

I personally don't like to stain beautiful wood, I prefer to spend a little extra and buy wood that's the color I want.  So, if I wanted a dark table, I would probably look at Walnut or Mahogany.  If I wanted a lighter table, I would look at Maple or Cherry.  

  • Author

Makes total sense and by the way I agree. Don't like stain or poly much at all

I love poly!  Poly is a wonderful finish to put on projects that need good protection.  

I've had great luck with maple.
I find it takes dye better than stain.

 

BTW -  I love Poly for Dining room tables. Call me old school, but give it 3 days to "really" harden and it's very robust.

Depending upon your budget you may give oak a fair shake in your decision. If you are wanting a high gloss top it will be a bit more work when you figure in the pore filling process. If you desire a "closer to the wood" feel you can skip the pore fill process and achieve some pretty impressive results with a dye/shellac/top coat finish. 

 

If you want to skip dyes/stains altogether heed the above options and go for the walnut/maple/cherry etc. Either way have fun with your build!

Bear in mind that lumber prices vary by region. A species that may be hard to come by where I am may be dirt cheap where you are. Here in the mid south, red oak is everywhere. Walnut is not too hard to find, but cherry and maple are like hen's teeth. Go to the Northeast, cherry is a lot more common. Seems like maple is cheaper the closer you get to Michigan.

Currently working on a dining table with hard maple.  Had some small issues with tear out when machine planing it but that will be easily remedied.  Otherwise it's really nice to work with and seems to accept all the other processes involved nicely.

 

I've also had a fair amount of success with oak and will probably involve walnut in a future project.

We made a 10 X 4 ft farmhouse table out of pine that turned out pretty nice.  It's all the budget could really handle at that time.  It cost about $250 in supplies to build.  It's really nice and I hope it stands the test of time...we'll see.  If I were building a nice dining room table for a house where the youngest kid is at least in his teens, I would build it out of walnut or cherry.  However, kids can be pretty hard on that stuff, so we went a different route for now.  Huge, cheap, and not to worried about dings and such.  Just depends on what you want!  Good luck!

 

P.S.  I followed two different DYI plans online to build the tabletop of one plan and the pedestal supports from another.  Here are the two sites:

http://tommyandellie.com/?p=2582

http://ana-white.com/2012/11/plans/triple-pedestal-farmhouse-table

I like Ana! Put her and Martha together and a guy won't stand a chance :D

Luke, I hunt pheasant in Kimball S.D. and they aren't many trees except around houses for a wind break. Do you have trouble getting wood at a reasonable price where you're located

No problem Jmc.

 

K Cooper, I'm not too far from the Black Hills, so pine is cheap and easy to find.  Hardwoods like walnut, mahogany, and cherry are harder to find and they are more expensive.  I guess I haven't done much comparing since I don't have a reference, but it's at least affordable.  I know building that farmhouse table out of something like oak or walnut would cost an arm and a leg.  About the only thing that's affordable to build with the other woods are coffee tables, end tables, small crafts, etc.

 

Yeah, we definitely don't have many trees up here :)

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.