Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Jewelry Box (Gary Robowski/Marc S.)

Featured Replies

Just finished this jewelry box for an 8th Anniversary present.

Birdseye Maple and Walnut.

Added my own variations from the WW video to fit my skill level and available tools, but for the most part, kept true to the dimensions , technique, joinery, and hardware.

This was a particularly great build, in part due to the wealth of knowledge and generosity of the members of this forum willing to help me out as I stumbled along the way.

My project journal can be found here:

post-15261-14092829364144_thumb.jpg

post-15261-14092828523357_thumb.jpg

post-15261-14092828774099_thumb.jpg

post-15261-14092832791731_thumb.jpg

Great job Vin! I still think it would dress it up just a little w/ a big ol 3 carat in the middle :D

  • Author

Great job Vin! I still think it would dress it up just a little w/ a big ol 3 carat in the middle :D

Ha.

 

Um Honey...why does my engagement ring keep sliding over towards that magnet in the corner?

I really enjoyed watching your build Vinny!  It really turned out great!

My ex took all the pieces I built for her when she left, kinda sent a mixed message to me.

I hope you have a long and happy marriage ! All the time and effort you invested in the jewelry box should show her how much you care.

Hey Vinny.  I watched and even commented as you were building this.  I regret to admit this turned out way better than I was expecting.  The combinations of woods types; the placement, size and contrast of the splines: the breadboard ends on the top: the inserts and the finish all add up to a very handsome piece.  This will end up being an heirloom.  Nicely done Sir!

I'm intrigued by the feet.  I'm thinking a long piece of 1"x1" with a 45 degree bevel cut down both of the long sides.....and then cross cut the foot off making the beveled third side but........how did you get the fourth beveled side on it?

 

Byrdie, this reminds me of other projects I've done where the beginning of the build looked rough...and plain and as I added to it, it began to look like something nicer.....then it evolved into 'nice' but no finish!!! Still plain....man I have to do something because it's nice enough but it just looks plain and dull.....and then you rub the tung oil over the mahogany and the masterpiece beneath shows itself....it was just waiting for the final touch.  Ain't wood cool?

  • Author

You're right about the long 1x1. I used the router table and a chamfer bit. The first 3 end were easy, but the fourth was tough. I had to ease into it from left to right, and then finish from the other side, right to left.

The grrrripper helped.

I made 7 in total. 4 came out right.

Cut them to size on the ts with a stop block.

Sent from my iPhone using Tapatalk

You're right about the long 1x1. I used the router table and a chamfer bit. The first 3 end were easy, but the fourth was tough. I had to ease into it from left to right, and then finish from the other side, right to left.

The grrrripper helped.

I made 7 in total. 4 came out right.

Cut them to size on the ts with a stop block.

Sent from my iPhone using Tapatalk 

Router table sounds like a good way to go on the 4th side but it sounds tedious.  Me don't have a gripper.... :( but from what I'm hearing from you and others, it may be a good investment.

Another gripper.....if this one gets "aholt of you"....its over

Dwayne-Johnson-2.jpg

  • Author

Wasn't tedious at all...think the whole process took less than 10 minutes for 4 (seven) feet.

Sent from my iPhone using Tapatalk

I often use a clamp to hold small pieces and keep my fingers away form the business end of machines.  I also have the gripper and use it as well.

  • 1 month later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

  • There are no registered users currently online

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,012 Total Members
  • 3,644 Most Online
  • JAR Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.