Recommended Posts

Posted

Great detail to your post ! Methods are just what I would do if I didn't have a few of the tools that make it much easier. So many ways to do things, making the best of what you got is the key !

Y'all also gotta give Franklin cred's for working in a new much smaller shop !

Posted

Thanks for the comments guys! I hope my wife reads this post and sticks a Festool Track saw under the Christmas tree for me!  The dust collection of the festool would be a welcome addition to a small space.

 

The pitch pockets are kind of annoying, but the good news is they are easy to hide with epoxy and a bit of dye.  I would like to send "props" out to steve and don for teaching me the epoxy trick way back in the "monster counter top" project i did.

 

I do miss my old, much larger, shop.  This shop is much more efficient in space, heat, and tooling than my previous one.  Its small, but I'm just as productive in the small shop as the large one.  I plan on replacing a few more tools with more space efficient ones in the not too distant future.  I could save some more space by upgrading to the Kapex CMS for example ($$$), and using my current CMS saw as a renovation saw.

Posted

Final Prep Before Finish

 

I did the final prep - sanding all again to 220, and end grain to 400.  Before the final sanding, I did some epoxy repairs.  I mixed up some 5 minute epoxy with a bit of black dye stain so I could fill in the sap pockets.

 

post-6372-0-98661600-1418168209_thumb.jp

 

Then I let it dry overnight, after I spread it nice and thick over the repair areas.

 

post-6372-0-93910200-1418168261_thumb.jp

 

I cleaned up the epoxy repairs with a sharp chisel and some sandpaper.  Then I put a slight chamfer on the bottom of the legs, and broke all the edges with sandpaper.

 

post-6372-0-06269900-1418168562_thumb.jp

 

Then I raised the grain and knocked off the fuzz with some sandpaper.

 

Next thing to do is apply finish.  Then after the finish is dry, I will need to add the cleats to attach the top.  Almost done!

 

Next Post - applying finish

 

Posted

Mans got balls to be mixing epoxy on his wife's granite countertops ! And the stupidity to document it in pictures ! But he got the excuse that he's working on her coffee table ......

Posted

Mans got balls to be mixing epoxy on his wife's granite countertops ! And the stupidity to document it in pictures ! But he got the excuse that he's working on her coffee table ......

That's what I thought when I saw that :) 

 

Pug thanks for the great documentation on this... I hope you realize how truly helpful it is for a neophyte such as myself.

Posted

Mans got balls to be mixing epoxy on his wife's granite countertops ! And the stupidity to document it in pictures ! But he got the excuse that he's working on her coffee table ......

Haha, I used a piece of hardboard at least!

Posted

That's what I thought when I saw that :) 

 

Pug thanks for the great documentation on this... I hope you realize how truly helpful it is for a neophyte such as myself.

I have taken so much from this forum (and Marc's site). I happy to give back to the community and to make a contribution.

Posted

Finishing and Loose Ends

 

My finish of choice for this project was oil based wipe on poly.  I used minwax wipe on poly for this project, and put 4 coats on the base and 6 coats on the top.

 

After the base was dry, I added the cross members so I could attach the top.  I drilled two 1/4 inch holes in each member, and then routed a 1/4" slot.  Afterwards, I routed a 1/2" slot over the 1/4" slot to allow washer head screws to nest.  Pocket holes join the cross members to the aprons.

 

post-6372-0-82589600-1418700428_thumb.jp

 

Then I laid the base on the top (upside down) and adjusted the overhang.  I modified my original design, and went with a 3" OH on each end, and 1" overhang on the edges.

 

post-6372-0-59479000-1418700465_thumb.jp

 

Then I drove some 1 1/4" washer head screws to hold it all together (Kreg screws).

 

So here is the final product!

 

post-6372-0-06044000-1418700630_thumb.jppost-6372-0-26975500-1418700606_thumb.jppost-6372-0-51052200-1418700649_thumb.jp

 

Continued....

Posted

After going back over this project journal, I realize that many of my photos are not high quality.  Maybe I need to buy a real camera and avoid using my phone's built in one.

 

Come to think of it, I think my wife has a Nikkon D40 hanging around that is not being used.  She replaced it a few years ago with some fancy-dancy model that cost as much as a kapex.

Posted

After going back over this project journal, I realize that many of my photos are not high quality.  Maybe I need to buy a real camera and avoid using my phone's built in one.

 

Come to think of it, I think my wife has a Nikkon D40 hanging around that is not being used.  She replaced it a few years ago with some fancy-dancy model that cost as much as a kapex.

 

I bought my wife a really nice camera last year for Christmas so I could use it in the shop  ;)

  • Like 1
Posted

Damn pug...we're gonna have to upgrade yours from "shop" to "factory" if you keep pumping out projects at this rate.

Haha, I am being productive lately. I used to shut down for winter, but with the smaller shop I can heat it fast and get a few hours in at night.

I am almost 1/2 way done a learning tower for my daughter currently. I'll post a pic when done (no journal for the tower though).

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Who's Online   1 Member, 0 Anonymous, 55 Guests (See full list)

  • Forum Statistics

    32.1k
    Total Topics
    437.6k
    Total Posts
  • Member Statistics

    26,009
    Total Members
    3,644
    Most Online
    Joseph b
    Newest Member
    Joseph b
    Joined