Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

HEPA filter Vs Non HEPA filter shop vacs

Featured Replies

  • Author

Yes. I use a drywall dust bag in combination with the level 5 HEPA filter trying to minimize as much as possible how much makes it through into the exhaust.

Home depot has a hepa rated filter I put on my 6 .0 rigid vac

Hmmm ok. Guess I may be in Home Depot in the next couple days.

How's the hose connection on festool and porter cable sanders?

You will need an adapter. Fein makes a popular one. Ridgid vacs are cheaper and powerful but even with the noise reduction they are significantly louder than the Festool or Fein. I've got a couple of the Ridgid vacs and they are dedicated to the louder machines that always call for hearing protection.

Steve, what vac-requiring tools don't need hearing protection? I guess sanding maybe but I like to wear mine even then...sanding also the time I'm most likely to play music through them. =p

Hmmm ok. Guess I may be in Home Depot in the next couple days.

How's the hose connection on festool and porter cable sanders?

 

I have that Rigid vac as well, that's my vacuum for cleaning up shavings and whatever dust is thrown around on the floor. I have hit hooked to a Dust Deputy. I connect it to my oscillating spindle sander, stationary belt sander, and miter saw. I can't see connecting that Rigid to my ETS 150/3 or any of my 5" ROS. There's entirely too much suction and you'd need to make an adapter with holes to lower the flow rate but not create excess strain on the motor by reducing the input too much.

  • Author

Ya after a lot more reading and shop evaluation. I am going to need a vac that has a plug in for auto start. Outlets are at a premium .. 1 outlet ... So I think a Fein turbo 1 is in my future.

That way I can always add the HEPA filter if I think I need it

...that has a plug in for auto start. Outlets are at a premium .. 1 outlet ...

 

I use the ivac for that:  http://www.amazon.com/BCTINT-iVac-Automated-Vacuum-Switch/dp/B0035YGLZG  It supports running both tool and vac off a single outlet or off different outlets (to have them on different circuits if you upgrade down the road--or run a long cord from inside tsk tsk).  There are also cheaper ones that don't support the multiple circuit thing.   I realize that adds to the cost of the vac essentially, and it's certainly nice to have it built in.   Some people overflow their single circuit with the ones on the vac though...obviously not a problem for you since you don't even have any other outlets let alone other circuits. =p

  • Author

I will take a look at ivac. Ya gotta love apartment garages. One damn outlet in the back corner of the garage. Not even in the middle or anything. I just love lugging my extension cord around the shop.

  • Author

The outlet on the vac is nice to have, if nothing else it makes the vac a nice extension cord.

That's what I was thinking. And it will limit my clutter of cords around the shop.

I hope the 66dB rating the Fein gets for noise is spot on. That's not loud at all.

Let us know what you get.  I am considering a vacuum as well.  It looks like the one feature that Festool offers that many don't is variable suction.  Since I don't currently have a vacuum, I am unsure how important that feature is.

 

Chris.

It was real easy to adjust the suction on my Fein. I drilled a ring of 3/8" holes around the connector on the end of the hose. I used 3 "o " rings to fit between the Fein end and the Festool ETS 150 ( it has 3 grooves in it. I took the sander and the hose end to the hardware stores plumbing department and tried different " O rings " until I found the diameter and thickness that worked. Buy a few extra cause I have lost some when I pulled the hose off carelessly especially when the vac is running.

I cut a section of PVC pipe that happened to fit over the holes when I use the vac for other uses. If you use full vac strength it pulls the sandpaper and pad down too hard to the work. Which heats up the hook and loop pad and wears it out quickly, at $42 each I learned the hard way!

Velcro makes tie wraps that help attach the tools cord to the hose.

  • Author

Man all these mods needed to get these shop vacs to to run correctly. It's really wearing on I spend that much money and then need more to mod it so it will work correctly sanding and stuff.

My mods were cheap and quick, few bucks for "o " rings and I had the PVC scrap but you could get that at the hardware store.

Depends on which Fein you get it may have the adjustable suction on it.

  • Author

My mods were cheap and quick, few bucks for "o " rings and I had the PVC scrap but you could get that at the hardware store.

Depends on which Fein you get it may have the adjustable suction on it.

The only Fein I've seen with it is the turbo ii HEPA version which is like $650

Do I miss another one?

I'm probably in the minority here because Bill Pentz has scared the bejeezus out of everyone with his Mein Kampf thesis on dust collection...

...but my position is kind of...who cares? Unless you're able to collect 99.97% at the source, which you're not, there's still particulate in the air. Where filters are concerned, better is...uh...better...but I'm not gonna stress out over it because it's like sticking your finger in a leak in the Hoover Dam. If you're truly concerned about breathing dust particles, wear a respirator in your shop 100% of the time. Otherwise, set up a reasonable DC system and accept the fact that you're breathing some particulates and yes it may shorten your life. I'm not losing sleep. YMMV.

Makes sense to me.

The only Fein I've seen with it is the turbo ii HEPA version which is like $650

Do I miss another one?

The cheaper turbo 1 uses an adjustable tool adapter factory much like Steve's mod. The older turbo 1 has an electronic speed control.

  • Author

The cheaper turbo 1 uses an adjustable tool adapter factory much like Steve's mod. The older turbo 1 has an electronic speed control.

So I should be looking for an older turbo 1 then? Electronic speed control would be nice to have without the festool price tag if it's not needed

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.