Tony Wilkins Posted January 5, 2015 Report Posted January 5, 2015 I need another project like I need a whole in the head. But I started a new one anyway: a milkman's workbench or in my case a half-dead old Soldier's workbench. I was about to get back to work on my Dutch tool chest and was thinking about how I was going to kludge together work holding to chop out the dovetails. Serendipitously (say that three times) I had just seen an old magazine article for the milkman's workbench. Decided this was the answer to my problems and had some 8/4 cherry that wasn't spoken for. Off I go. I blogged about it in 'Running with Sharp Objects' linked below. Quote
Llama Posted January 5, 2015 Report Posted January 5, 2015 I thought you made a moxon a while back? Quote
Tony Wilkins Posted January 5, 2015 Author Report Posted January 5, 2015 I thought you made a moxon a while back? I did. But I need something to help me hold work down horizontally as well as vertically. 1 Quote
duckkisser Posted January 5, 2015 Report Posted January 5, 2015 I really like this type of bench for transporting my work to a different location like a craft sale. maybe someday ill make one but I doubt it since I am more of a power tool user. Quote
bushwacked Posted January 5, 2015 Report Posted January 5, 2015 Awesome. Can't wait to see this build Quote
derekcohen Posted January 6, 2015 Report Posted January 6, 2015 I did. But I need something to help me hold work down horizontally as well as vertically. But ... how are you going to hold the work down on the Milkman's Bench? Tony, stop procrastinating and finish the project you are already building! Regards from Perth Derek 2 Quote
Scott Bailey Posted January 6, 2015 Report Posted January 6, 2015 ok i had never heard of this so, google to the rescue and wow, for someone like me in a small shop with a horrible bench this looks really cool... are you going to post a project journal on this? one question though, for someone like me who won't be able to turn those screws, does it make sense to install vise hardware instead? Quote
Tony Wilkins Posted January 6, 2015 Author Report Posted January 6, 2015 ok i had never heard of this so, google to the rescue and wow, for someone like me in a small shop with a horrible bench this looks really cool... are you going to post a project journal on this? one question though, for someone like me who won't be able to turn those screws, does it make sense to install vise hardware instead? STB; I don't see why you couldn't do that. Another of Schwarz' blogs shows someone using wedges for work holding. Derek: I don't think this will take long - relative to me. I'm going to use clamps and angle Iron just like the article. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.