neoOberon Posted January 6, 2015 Report Posted January 6, 2015 I'm shopping for a Dado stack...I have it narrowed down to the Freud SD208 and the SD508. Would anyone care to comment if the SD508 is worth the extra expense? For anyone that uses the SD208, how clean does it cut? Thx, Chris Quote
woodbutcher74 Posted January 6, 2015 Report Posted January 6, 2015 I have a SD208 and it worked well until I hit a screw while cutting a slot. Carbide flew all over. I replaced the SD208 with a SD508 and it works really well. I'm not sure if it's worth the extra $$$$ over the 208 but it is a nice. Quote
knotscott Posted January 7, 2015 Report Posted January 7, 2015 The 208 tends to leave slight striping at the bottom of the cut, and slightly more tearout at exit than the premium sets. I've never regretted having a better set, but it's a judgement call. Quote
woodbutcher74 Posted January 7, 2015 Report Posted January 7, 2015 Just got an email from Eagle America. 10% off Freud blades, in case you want to check it out. Quote
HunterL Posted January 7, 2015 Report Posted January 7, 2015 Holey moley, I borrowed the 508 from a neighbor to use on my project. I never knew dado stacks could make cuts so nice! Made me realize what a hunk of junk my old one was, I say go for the 508! Full disclosure, I have never used the 208, but the 508 is definitely a cut above the rest! Quote
EdG Posted January 8, 2015 Report Posted January 8, 2015 Woodbutcher - what is the promo code to get the 10% off deal? Quote
neoOberon Posted January 9, 2015 Author Report Posted January 9, 2015 Thanks for the replies...I'm still "tore" so to speak. But no doubt will buy the 508. Quote
woodbutcher74 Posted January 9, 2015 Report Posted January 9, 2015 I don't think you'll be disappointed at all. Quote
knotscott Posted January 9, 2015 Report Posted January 9, 2015 I know you mentioned that you've narrowed your choices to the Freud SD208 and SD508, but I think you'd do well to consider the Delta/DeWalt 7670 for ~ $120 over the SD208.....better performer IME, better shim stock, and a great carrying case. I'd also consider the Infinity Dadonator over the SD508 @ ~ $200. Quote
Dnorris1369 Posted January 9, 2015 Report Posted January 9, 2015 I just got the dewalt set a couple weeks ago. Man what a nice set it is. Very smooth cutting. I also love the case it rests in. Very easy to keep organized and setup Sent from my iPhone using Tapatalk Quote
jlight129 Posted January 14, 2015 Report Posted January 14, 2015 hey I am also looking for a dado stack that's going to have clean cuts but a price at or below 200 any ideas? you guys seem to like sd508 Quote
estesbubba Posted January 14, 2015 Report Posted January 14, 2015 I know you mentioned that you've narrowed your choices to the Freud SD208 and SD508, but I think you'd do well to consider the Delta/DeWalt 7670 for ~ $120 over the SD208.....better performer IME, better shim stock, and a great carrying case. I'd also consider the Infinity Dadonator over the SD508 @ ~ $200. I have both the SD208 and Dewalt 7670 and the Dewalt is a much better performer. Quote
Brendon_t Posted January 14, 2015 Report Posted January 14, 2015 I am expecting my 208 to get here today via amazon. I'm going to set it up to make a few 3/8 box joints for a current project. I'll let y'all know how it cuts new out of packaging. Quote
knotscott Posted January 14, 2015 Report Posted January 14, 2015 I have both the SD208 and Dewalt 7670 and the Dewalt is a much better performer. Same observation I made when I had both. Quote
Brendon_t Posted January 15, 2015 Report Posted January 15, 2015 Ib made the first cuts with my 208 last night. Setup was very easy and the dado's were extremely clean. Cut 1 box kit of 1/4" finger joints and one of 1/2". Both in walnut and maple. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.