Recommended Posts

Posted

I have never worked with veneer before and thought I would give it a shot. I had this Zebrawood veneer laying around that I picked up last year at Grizzly's tent sale. I still need to work on my photography as the pictures never turn out as well as I would like them to.  

 It's red oak with walnut splines. The lid is oak with the Zebrawood veneer and maple inlay wrapped around. I finished it with MinWax Spray poly in matte.

post-14026-0-06454200-1428341916_thumb.j

post-14026-0-73101400-1428341923_thumb.j

  • Like 1
Posted

Thanks guys. I thought I would pass along something I tried and it worked pretty well. Before I finished the box I used DS tape to hold the hinge in place while I predrilled the holes for the #1 1/4" screws. It held so well that I put some tape back on when I did the final assembly. When the tiny screws go through it helps hold them. I remember wdwerker mentioning adding a drop of glue on small screws and thought the tape would do the same job. Works pretty well.

  • Like 1
Posted

I use the glue to harden the wood so those few threads don't strip out . Just pull the screw, add a drop of glue put the screw back in.

Epoxy works to reinforce screw threads in hardware mounted to wood that will be subjected to strong stresses.

Boatworks and Triple H taught me that one

Posted

Thanks guys. I thought I would pass along something I tried and it worked pretty well. Before I finished the box I used DS tape to hold the hinge in place while I predrilled the holes for the #1 1/4" screws. It held so well that I put some tape back on when I did the final assembly. When the tiny screws go through it helps hold them. I remember wdwerker mentioning adding a drop of glue on small screws and thought the tape would do the same job. Works pretty well.

This is yellow/white glue and not epoxy, right?

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Who's Online   1 Member, 0 Anonymous, 75 Guests (See full list)

  • Forum Statistics

    32.1k
    Total Topics
    437.6k
    Total Posts
  • Member Statistics

    26,009
    Total Members
    3,644
    Most Online
    Joseph b
    Newest Member
    Joseph b
    Joined