rodger. Posted December 2, 2015 Report Posted December 2, 2015 Looking to use scrapers for surface prep (tear out removal) on flat hardwoods. Not sure which thickness is suitable - suggestions? 1 Quote
Eric. Posted December 2, 2015 Report Posted December 2, 2015 I use the thicker scrapers...I think they're like .030" or something like that...about 99% of the time. The thin ones are nice for very fine work but I don't use them that often. 1 Quote
Tom Cancelleri Posted December 2, 2015 Report Posted December 2, 2015 I use the Veritas Super hard scraper for the heavier cuts, like flushing up joints. I use the thin Bahco scrapers for fine cuts, and clean up passes on things like thin inlays or stuff like perfling on a guitar top. Quote
Brendon_t Posted December 2, 2015 Report Posted December 2, 2015 Out of my 3, there is one that I will always reach for first, it feels the best in hand and super easy to sharpen. Just put a mic to it and it measured at 28 thousanths. I'm sure it's the steel, not the thickness but you asked about thickness. Quote
TerryMcK Posted December 2, 2015 Report Posted December 2, 2015 I now mainly use Pax scrapers and I think they are around 36 thou. They are similar thickness to the Crown set which I also have. Quote
Trip Posted December 2, 2015 Report Posted December 2, 2015 Card scraper thickness/flexibility is a personal preference and somewhat application specific. Lee Valley sells a set for $20. It's got four scrapers of different thicknesses/stiffness. http://www.leevalley.com/US/wood/page.aspx?p=32670&cat=1,310,41069&ap=1I've got the set and tend to use the middle two, but that's just me.Since you'll be on LV's site anyway, these are also very useful:http://www.leevalley.com/US/wood/page.aspx?p=32672&cat=1,310,41069&ap=1http://www.leevalley.com/US/wood/page.aspx?p=67392&cat=1,310,41069&ap=1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.