Immortan D Posted December 2, 2015 Report Posted December 2, 2015 Open to suggestions. Been looking at BU and BD planes from LN. Also wooden planes. Quote
TerryMcK Posted December 2, 2015 Report Posted December 2, 2015 I have the bevel up jointer from Veritas and it is fantastic.I also have a Stanley #7 and that is good too but I much prefer the Veritas. 1 Quote
SamV Posted December 3, 2015 Report Posted December 3, 2015 I'd tune up a Stanley #7 or #8 and save my money for something else. It's a plane for medium shavings and middle work, not finishing or fine shavings. 1 Quote
rodger. Posted December 3, 2015 Report Posted December 3, 2015 i also have the veritas bevel up jointer plane - awesome tool. 1 Quote
Barron Posted December 9, 2015 Report Posted December 9, 2015 I have and love the LN#7 and love it. But, I really don't use it all that often, my #5 and #4 handle most of my plane needs. So, the like the advice above I'd probably get a less expensive bevel up plane from LV or LN and spend more on a really good smother. 1 Quote
mking1 Posted December 10, 2015 Report Posted December 10, 2015 I love my LN #8 but I too do not use it as often as the LN #4 with a 55 deg frog. 1 Quote
Tom Cancelleri Posted December 11, 2015 Report Posted December 11, 2015 I have the BU from Veritas. It's a great tool, however I do prefer the bevel changed from the stock 25 degree to a 38 degree bevel. Leaves a much nicer surface with less risk of tear out. I currently have a 50 degree in my jointer for edge jointing. 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.