AstroDave Posted December 26, 2015 Report Posted December 26, 2015 Hi All.... With the gift cards I received for Christmas I am contemplating acquiring a disk sander. However before I do I'd like to get some opinion on the utility of this type of tool. I've read several posts here and elsewhere that indicate that it depends on the project and what tools you already possess, which is no surprise. For me that would be a Rigid Combo OSS/Belt sander and and old Delta 6"/48" disk belt sander. While doing my most recent Christmas project with bandsaw boxes I felt that a 12" disk sander would have been handy. While I can't afford one of the better combo machines eg Powermatic I am considering the bench top Jet and Rikon 12" models. I have also read many reviews of those units with widely mixed opinions...not surprising with QA being what it is on lesser models. Primarily centered around less that flat disks and bad run out. So any guidance here is greatly appreciated. Quote
bushwacked Posted December 26, 2015 Report Posted December 26, 2015 Have you looked at the central machinery (harbor freight) disk sander. Supposed to be a diamond in the rough. It could be an option and save money to spend on something else? What is your budget? Quote
Brendon_t Posted December 26, 2015 Report Posted December 26, 2015 My neighbor has a bench top dial sander from harbor freight and it's actually a decent unit. I have gone over and used it for a few things. It is obviously not the quality of a pm or jet but it really is a one trick pony. The table locks down securely and it doesn't vibrate much. Just a thought. Quote
AstroDave Posted December 26, 2015 Author Report Posted December 26, 2015 Thanks guys I have a harbor freight near me and will take a look. My budget is under 500$ so if I can save the Woodcraft monies for something else...hmm. Say that track saw or ROS that's a win win. Quote
..Kev Posted December 26, 2015 Report Posted December 26, 2015 I have a Grizzly that's served me well for years. Quote
Andy Wright Posted December 26, 2015 Report Posted December 26, 2015 I have a bench top 12" delta disk sander that works great. I have used it for metal and wood with no problems. I found an industrial ubit with a 12" disk and 6" belt a year ago, so the older benchtop is gatherinb dust, but I don't think you will regret the bench top version Quote
bushwacked Posted December 26, 2015 Report Posted December 26, 2015 I have a Grizzly that's served me well for years. Which model? Quote
..Kev Posted December 26, 2015 Report Posted December 26, 2015 I have the combo but, it's only a 9" disc http://www.grizzly.com/products/Combination-Sander-6-x-48-Belt-9-Disc-Z-Series/G1014Z And, I have this one when I need a larger disc. http://www.grizzly.com/products/12-Disc-Sander/G7297 Quote
Tom Cancelleri Posted December 26, 2015 Report Posted December 26, 2015 I picked this up from woodcraft last year on sale for 229. 10" disc 6x48 belt sander. It's a decent unit. The miter gauge is pretty flimsy, but it does the job, and can be replaced. Dust collection is meh at best. However, for 229 is does what I needed it to do, and it does it well. http://www.performancetoolcenter.com/rikon-50-122-6-x-48-in-belt-and-10-in-disc-sander-w-stand/?gclid=CMXiiMOz-skCFYUYHwodPXkPnA Quote
Firehawk Posted December 26, 2015 Report Posted December 26, 2015 I have the same one as Tom and thought it is a good value Quote
AstroDave Posted December 26, 2015 Author Report Posted December 26, 2015 Thanks Guys...the Rikon is over 300 now So do you all find you use it frequently in your workflow? Quote
Tom Cancelleri Posted December 26, 2015 Report Posted December 26, 2015 7 minutes ago, SplinteredDave said: Thanks Guys...the Rikon is over 300 now So do you all find you use it frequently in your workflow? I don't use it on every project, but for certain things it's a huge time saver. My last use was a Rogowski box. I used it for the feet. scribed a line that I wanted to chamfer too, set the miter gauge and just did the 4 sides in seconds. Quote
AstroDave Posted December 27, 2015 Author Report Posted December 27, 2015 Thanks Tom... Sent from my SM-G900V using Tapatalk Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.