comp56 Posted January 4, 2016 Report Posted January 4, 2016 started a new project involving a guitar shaped table, not very big just an accent table if you will... here is the glue up and the template ........ Wood used: Red Oak Walnut Paduak once the slab was what I call taken out of the flat oven (planer) the template was used to draw out the shape.... then off to the cutting tool........ got some paduak inlay done for buttons, don't look like much now until final sand and finish the paduak will come alive... neck pick up, middle pick up and *bridge next....you can see they are drawn out 1 Quote
wtnhighlander Posted January 4, 2016 Report Posted January 4, 2016 Nice idea for a table top. The padauk buttons really stand out! Quote
comp56 Posted January 4, 2016 Author Report Posted January 4, 2016 thanks, got the neck middle and bridge inlay done, again my favorite part is getting a finish on things to see the wood pop.... for now time to flip it over and work on a design for legs......I'm going with walnut legs of sorts with a support about 2 inches from the floor, I am laying it out right on the bottom of the table but it won't be there when finished. still have work to do on each leg before it all goes together......more to come.... Quote
..Kev Posted January 4, 2016 Report Posted January 4, 2016 Shaped like guitar necks? Looking great! 1 Quote
shaneymack Posted January 5, 2016 Report Posted January 5, 2016 Cool idea! Nice work. I look forward to seeing this thing finished! Sent from my SGH-I337M using Tapatalk Quote
Popular Post comp56 Posted January 5, 2016 Author Popular Post Report Posted January 5, 2016 here it is with some finish on it....I may or may not go with another coat.... 4 Quote
..Kev Posted January 5, 2016 Report Posted January 5, 2016 Cool design on the base! Turned out very cool! Quote
AstroDave Posted January 6, 2016 Report Posted January 6, 2016 That is very cool... Love the pick design on the base..very clever. Marking this one down to steal er borrow for my very long project list. Quote
shaneymack Posted January 7, 2016 Report Posted January 7, 2016 Turned out really neat! Took me a second but realised the bottom shelf was a pick. Great idea!! Sent from my SGH-I337M using Tapatalk Quote
Klappco Posted January 7, 2016 Report Posted January 7, 2016 Wonderful work! Sent from my iPad using Tapatalk Quote
Rapid Roger Posted January 7, 2016 Report Posted January 7, 2016 I really like your little table too. Knowing me, I probably would have tried to make the legs look like guitar necks too as was suggested by someone else. I made a guitar clock for my sons Christmas present a few years ago. Of course this was mostly a scroll saw project but, I tend to get a bit too detailed on accuracy at times. 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.