Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Tip #7 – Loose Head, Get PEGged!

Featured Replies

  • Popular Post

OK, there's a joke here someplace, but we'll just ignore that... :)

 

I wasn't planning a tip for today, but winter's finally arrived in the Northeast (El Nino) and some maintenance items have cropped up... Got me thinking about a new tip...

Now, one of the first things to annoy me about the arrival of winter are xMas decorations before Thanksgiving... This is quickly followed by repairing old chairs whose spindles have come apart and at least one mallet in my shop developing a loose head...

What do chair spindles and mallet heads have in common – we’ll there’s the proper way to fix them, then there’s polyethylene glycol (PEG)...

The traditional solution for a loose mallet head is to drive the wedge deeper into the handle... And that’s just fine... For a while... But after a few years, the top of the mallet starts looking pretty beat-up, so you remove it, fashion a new shoulder, trim the handle’s top and drive a new wedge... Or buy another handle, whatever...

There must be a better way...

Well there is, kind of... It’s kind of a tip and kind of a hack...

Mix-up some polyethylene glycol (PEG) and soak the head/handle for a bit – maybe 20 minutes... Soak the handle & head with the head installed on the handle. The PEG displaces the water in the handle and swells wood fibers. Let dry overnight. The head will never come loose again... Or none of mine have for the ten years I’ve been doing this... Let me clarify, you only need to soak the mallet once. I soaked my first framing hammer about a decade ago, and it hasn't budged since... Not the slightest rattle, nudge, whatever. It's affixed to the handle as if with epoxy... But there no adhesives involved -- the wood in the handle simply swelled to fit the hammer head then got locked-in that way... Problem solved...

BTW: it’s also a good way to fix chairs (which is why I have it in the shop), but that’s another tip... :)

Note: PEG is available in a wide range of molecular weights... You need fairly high molecular weight PEG around the shop for these types of repairs... I use 1000 weight: http://www.amazon.com/gp/product/B00I31S9EM?psc=1&redirect=true&ref_=oh_aui_search_detailpage  --- enough for about five lifetimes...

For more information about PEG: https://en.wikipedia.org/wiki/Polyethylene_glycol

 

 

Edited by hhh

  • Author

==> MiraLAX is good for more than "unclogging the pipes"? ?

Right idea, wrong molecular weight...

PEG's used in healthcare, paint ball, antifreeze, toner cartridges, etc etc...  It's the molecular weight that bins usage...

Like Gougeon (West Systems) Epoxy, I first learned about PEG around the boatyard... It's an effective anti-rot treatment and used to conserve raised water-logged wood-hull shipwrecks...

Here's a ship that had a small run-in with Mother Nature... and lost... big time...

Ship-1.jpg.2e9429fa5d97d361df13b50834337

'05@hhh - Nikonos, 15mm, f2.8, E6

If of historical significance, they are raised and preserved with, you guessed it, PEG...

MaryRose-conservation2.thumb.jpg.69eb877

 

  • 2 weeks later...
On 1/16/2016 at 10:10 AM, hhh said:

...and soak the head/handle for a bit – maybe 20 minutes... The PEG displaces the water in the handle and swells wood fibers....

I'm not following something here.  Do you soak the head or the handle or do you soak both?  

If the fibers swell during the soaking period won't it be difficult to get the head back on the handle or does it take overnight for the swelling to occur?

  • Author

==>Soak the handle with the head installed, I believe.

Exactly...

 

I'll update the post...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.